By visiting this site, you accept the use of cookies. More about our cookie policy.

Babbit BKA

Designation

Name The value
Designation GOST Cyrillic БКА
Designation GOST Latin BKA
Transliteration BKA
The chemical elements BeCo

Description

Babbit BKA is used: to fill the friction of axle bearings for railway cars and tenders Railways; in engine and metallurgical engineering (for potting of inserts Buks passenger carriages and freight wagons of broad gauge and bearings of locomotives and tenders, bearings of rolling mills, electric motors low rpm, centrifugal pumps and fans; to fill the tram books).

Note

The coefficient of friction of the babbit without lubrication of 0.44, with the grease of 0.004. Maximum load capacity: static — 200 kgf/cm2, dynamic — 500 kgf/cm2 sec. The maximum temperature of normal bearing operation — +150 °C. recommended fill thickness ≥3.0 mm.

Standards

Name Code Standards
Non-ferrous metals, including rare metals, and their alloys В51 GOST 1209-90
Castings from non-ferrous metals and alloys В84 OST 24.916.01-71

Chemical composition

Standard Al Zn Sb Pb Bi Ca Mg Na
GOST 1209-90 0.05-0.2 0.4-0.6 ≤0.25 The rest ≤0.1 0.95-1.15 ≤0.2 0.7-0.9
OST 24.916.01-71 0.05-0.2 - ≤0.25 The rest ≤0.1 0.85-1.15 ≤0.02 0.6-0.9
Pb is the basis.
According to GOST 1209-90 the total content of other impurities is ≤ 0.30%.
The total content of impurities by OST 24.916.01-71 should be ≤ 0.30%. As agreed by the manufacturer with the consumer, babbit can be supplied with an aluminum content of less than 0.050%.

Mechanical characteristics

σB, MPa d Brinell hardness number, MPa
In the delivery condition
≥91 ≥2.5 ≥32

Description mechanical marks

Name Description
σB Limit short-term strength
d Elongation after rupture

Physical characteristics

Temperature r, кг/м3
20 10500

A description of the physical symbols

Name Description
l Coefficient of thermal conductivity
С Specific heat

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)