GOST 10092-2006

• gost-10092-2006.pdf (700.68 KiB)
  ГОСТ 10092-2006

GOST 10092−2006 cupro-Nickel Tubes for heat exchangers. Specifications

GOST 10092−2006

Group В64

INTERSTATE STANDARD

CUPRO-NICKEL TUBES FOR HEAT EXCHANGERS

Specifications

Cupro-nickel tubes for heat-exchange apparatus. Specifications

ISS 23.040.15
GST 18 4750

Date of introduction 2008−01−01

Preface

Goals, basic principles and main procedure of works on interstate standardization established GOST 1.0−92 «interstate standardization system. Basic provisions» and GOST 1.2−97 «interstate standardization system. Interstate standards, rules and recommendations on interstate standardization. The procedure of development, adoption, application, renewal and cancellation»

Data on standard

1 DEVELOPED by the Technical Committee for standardization TC 106 «Tsvetmetprokat», Scientific-research, project and design Institute for alloys and processing of nonferrous metals «joint-stock company «Institute tsvetmetobrabotka» (JSC «Institute tsvetmetobrabotka»

2 SUBMITTED by the Technical Secretariat of the Interstate Council for standardization, Metrology and certification

3 ACCEPTED by the Interstate Council for standardization, Metrology and certification (Protocol No. 29 of June 24, 2006)

The standard was accepted by voting:

4 by Order of the Federal Agency for technical regulation and Metrology dated December 27, 2006 N 500-St interstate standard GOST 10092−2006 introduced as a national standard of the Russian Federation from January 1, 2008

5 INSTEAD OF GOST 10092−75


Information about introduction in action (termination) of this standard is published in the index «National standards».

Information about the amendments to this standard is published in the index «National standards», and the text changes — in the information sign «National standards». In case of revision or cancellation of this standard the appropriate information will be published in the information index «National standards»

AMENDED, published in IMS No. 6, 2008

An amendment made by the manufacturer of the database

1 Scope

This standard applies to cold cupro-Nickel tubes used for the manufacture of heat exchangers and products for other purposes.

The standard specifies the dimensions, technical requirements, acceptance rules, methods of control and testing, packaging, labeling, transportation and storage of pipes.

2 Normative references

This standard uses the regulatory references to the following international standards:

GOST 427−75 Rulers measuring metal. Specifications

GOST 492−2006 Nickel, Nickel alloys, and copper-Nickel, processed by pressure. Brand

GOST 2991−85 wooden disposable Boxes for loads up to 500 kg. General specifications

GOST 2999−75 Metals and alloys. Method of measurement of hardness by Vickers

GOST 3845−75 Pipe metal. Test method hydraulic pressure

GOST 6507−90 Micrometers. Specifications

GOST 6689.1−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of copper

GOST 6689.2−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of Nickel

GOST 6689.3−92 Nickel, alloys Nickel and copper-Nickel. The method of determining the amount of Nickel and cobalt

GOST 6689.4−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of zinc

GOST 6689.5−92 Nickel, alloys Nickel and copper-Nickel. Methods of iron determination

GOST 6689.6−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of manganese

GOST 6689.7−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of silicon

GOST 6689.8−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of aluminium

GOST 6689.9−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of cobalt

GOST 6689.10−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of carbon

GOST 6689.11−92 Nickel, alloys Nickel and copper-Nickel. Method for the determination of tungsten

GOST 6689.12−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of magnesium

GOST 6689.13−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of arsenic

GOST 6689.14−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of chromium

GOST 6689.15−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of antimony

GOST 6689.16−92 Nickel, alloys Nickel and copper-Nickel. Methods for the determination of zinc, cadmium, lead, bismuth and tin

GOST 6689.17−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of bismuth

GOST 6689.18−92 Nickel, alloys Nickel and copper-Nickel. Methods of determining sulphur

GOST 6689.19−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of phosphorus

GOST 6689.20−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of lead

GOST 6689.21−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of titanium

GOST 6689.22−92 Nickel, alloys Nickel and copper-Nickel. Methods for determination of tin

GOST 7502−98 metallic measuring tape. Specifications

GOST 8694−75 Pipe. The test method for distribution

GOST 8695−75 Pipe. Test method for flattening

GOST 10006−80 (ISO 6892−84) of the Pipe metal. Test method tensile

GOST 10198−91 wooden Boxes for goods of mass over 200 up to 20000 kg. General specifications

GOST 14192−96 Marking of cargo

GOST 15467−79 quality Control of products. Basic concepts. Terms and definitions

GOST 18242−72* Statistical acceptance inspection by alternative feature. Plans control
_____________
* On the territory of the Russian Federation GOST R 50779.71−99** (ISO 2859−1-89) «Statistical methods. Procedure sampling on alternative grounds. Part 1. Sampling plans consistent parties on the basis of acceptable quality level AQL».

** In the territory of the Russian Federation from 01.06.2007 valid GOST R ISO 2859−1-2007. Here and hereinafter. — Note the manufacturer’s database.

GOST 18321−73 Statistical quality control. Methods of random selection of piece products

GOST 18477−79 Containers are universal. The types, basic parameters and dimensions

GOST 21073.0−75 ferrous Metals. Determination of grain size. General requirements

GOST 21073.1−75 ferrous Metals. Determination of grain size by comparison with the scale of microstructures

GOST 21650−76 means of fastening of package cargoes in transport packages. General requirements

GOST 22225−76 universal Containers with a gross weight 0,625 and 1,25 t. specifications

GOST 22235−76 freight Wagons main Railways of 1520 mm. General requirements for ensuring safety during loading-unloading and shunting works

GOST 24047−80 Semi-finished products from nonferrous metals and their alloys. Sampling for tensile test

GOST 24231−80 non-ferrous metals and alloys. General requirements to selection and preparation of samples for chemical analysis

GOST 24597−81 the packaged goods. Basic parameters and dimensions

GOST 25086−87 non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 26663−85 transport Packs. Formation with the use of packaging. General technical requirements

GOST 26877−91 metal Products. Methods of measuring form deviations of

Note — When using this standard appropriate to test the effect of reference standards for the sign «National standards» drawn up as of January 1 of the current year and related information signs, published in the current year. If the reference document is replaced (modified), then the use of this standard should be guided by the replaced (modified) document. If the reference document is cancelled without replacement, then the situation in which the given link applies to the extent that does not affect this link.

3 Terms and definitions

This standard applies the following terms with respective definitions:

3.1 the seamless round tube: a Hollow product of round cross section with uniform wall thickness, which at all stages of production has a continuous circumference.

3.2 ovality (deviation from circular shape): Difference between the largest and smallest values of the diameters measured at one cross section perpendicular to the tube axis.

3.3 nominal wall thickness: wall Thickness specified in the order.

3.4 raznoshennoy (thickness variation, the deviation from concentricity): the difference between the largest and smallest values of wall thickness measured in single cross-section perpendicular to the tube axis.

3.5 pipe in segments: Straight segments of the product.

3.6 times the length: the Period of integral multiple of the number of core length with an allowance for cutting and a tolerance on the overall length.