By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel 10kp

Steel 38 (38-PV) Steel 20-KS 20-KHS steel 20K steel Steel 20kp 20ps steel 20YuA steel 20YUCH steel (20YUCH) Steel 22ZhR 22K Steel Steel 25 Steel 25ps Steel 30 Steel 35 Steel 20 (20A; 20B) Steel 40 (40A) Steel 43 (43-PV) Steel 45 Steel 45T (45ST) Steel 50 Steel 54 (54pp) Steel 55 Steel 58 (55pp) Steel 60 Steel 60pp (60pp-PV) Steel 90 (BP5) Steel D Steel DB E55 steel (NIPRA) Steel 11kp Steel 0501 Steel 05kp Steel 08 Steel 08kp 08ps steel Steel 08Fkp Steel 08U (08UA; 08U2 (08U2A)) 08YUP steel 08YuPR steel Steel 10 10kp steel 10ps steel 10YuA (10Yu) steel 18YuA steel Steel 11MTUA 11YuA steel 12K Steel Steel 15 (15A) 15K Steel Steel 15kp 15ps steel 15FSA steel 15YuA steel 16GNMA steel 16K Steel 18K Steel 18kp steel

Designation

Name The value
Designation GOST Cyrillic 10кп
Designation GOST Latin 10kp
Transliteration 10kp
The chemical elements 10

Description

10kp steel is used: for the manufacture of sheet metal, 1−2 mm 4−14 category, intended for cold forming; sheet rolled double-sided electrolytic coating and single-side polymer coating, used in the construction industry, commercial engineering, industrial ventilation, household appliances, decoration and other purposes; parts, operating at temperatures up to +450 °C, which are requirements of high plasticity; bushings, lugs, washers, screws and other parts after HTO (chemical heat treatment), requirements of high surface hardness and wear resistance at low strength core; welded pipes; enamelware; cold strip 0,05−4,00 mm, designed for bending, punching parts, manufacture of pipes, cored wire, parts, bearings and other metal products.

Note

The degree of deoxidation - KP.

Standards

Name Code Standards
Sectional and shaped rolling В32 GOST 1050-88, GOST 7417-75, GOST 8560-78, GOST 10702-78, GOST 14955-77, GOST 1050-2013, TU 14-1-2118-77, TU 14-11-245-88, TU 14-1-1271-75, TU 14-136-367-2008
Sheets and stripes В33 GOST 1577-93, GOST 4041-71, GOST 13345-85, GOST 24244-80, TU 14-1-450-72, TU 14-1-4516-88
Classification, nomenclature and general norms В70 GOST 2771-81
Pipes steel and connecting parts to them В62 GOST 3262-75, GOST 10704-91, GOST 10705-80, GOST 10707-80, TU 14-3-1428-86, TU 14-3Р-63-2002, TU 1373-022-05757850-08, TU 1373-013-02949352-2003
Tapes В24 GOST 3560-73
Steel wire medium- and high-carbon В72 GOST 3920-70, GOST 7372-79, GOST 9389-75, GOST 9850-72, GOST 17305-91, GOST 26366-84
Tapes В34 GOST 503-81, GOST 10234-77, GOST 19851-74
Low-carbon steel wire В71 GOST 5663-79
Sheets and stripes В23 GOST 82-70, GOST 14918-80, GOST 16523-97, GOST 19904-90, GOST 16523-89, GOST 16523-70, GOST 19903-90, TU 14-1-4695-89
Sectional and shaped rolling В22 GOST 8278-83, GOST 8281-80, GOST 8282-83, GOST 8283-93, GOST 8319.0-75, GOST 9234-74, GOST 10551-75, GOST 11474-76, GOST 19771-93, GOST 19772-93, GOST 2590-2006, GOST 2879-2006
Bulls. Blanks. Slabs В31 OST 3-1686-90, TU 14-1-4944-90

Mechanical characteristics

Section, mm sT|s0,2, MPa σB, MPa d5, % d4 d d10 y, % Brinell hardness number, MPa HRB
Tape flatted average strength of 0.1-4.0 mm according to GOST 10234-77 in the state of delivery (indicated delivery)
- - 490-780 - - - - - - -
- - 390-540 - - - - - - -
- - 540-690 - - - - - - -
- - 690-830 - - - - - - -
- - ≤440 - - ≥20 - - - -
- - ≤410 - - - - - - -
Cold-rolled steel strip 0,05-4,00 mm according to GOST 503-81 on delivery
- - ≥540 - - - - - - -
≤1.5 - 310-440 - ≥17 - - - - -
1.55-2 - 310-440 - ≥18 - - - - -
2.1-2.9 - 310-440 - ≥20 - - - - -
3-4 - 310-440 ≥24 - - - - - -
2.1-2.9 - 440-590 - ≥4 - - - - -
3-4 - 440-590 ≥4 - - - - - -
≤1.5 - 270-390 - ≥23 - - - - -
1.55-2 - 270-390 - ≥26 - - - - -
2.1-2.9 - 270-390 - ≥30 - - - - -
3-4 - 270-390 ≥32 - - - - - -
≤1.5 - 370-510 - ≥7 - - - - -
1.55-2 - 370-510 - ≥9 - - - - -
2.1-2.9 - 370-510 - ≥10 - - - - -
3-4 - 370-510 ≥12 - - - - - -
Rolled sheet 1-2 categories of heat-treated (annealing, normalization, high tempering or normalizing + tempering) in the delivery state according to GOST 4041-71
4-14 - 270-410 ≥32 - - ≥28 - ≤114 ≤64
Wire for cold heading as supplied by GOST 5663-79
- - 440-590 - - - - ≥55 - -
- - ≤590 - - - - ≥55 - -
Longitudinal electric-welded pipes (Dy=10-530 mm) in the delivery condition. Listed marsvolta base metal
- ≥196 ≥314 ≥25 - - - - - -
Hot-rolled steel and hot rolled with special surface finish
- - - - - - - - ≤137 -
- - - - - - - - ≤115 -
Steel calibrated and calibrated with special surface finish
- - ≥370 ≥8 - - - ≥55 ≤179 -
- - 310-410 - - - - ≥50 ≤143 -
- - 290-390 - - - - ≥50 ≤143 -
Hot-rolled sheet in the delivery condition. Group strength К270В
≤2 - 270-410 - ≥24 - - - - ≤65
2-3.9 - 270-410 - ≥26 - - - - ≤65
Cold-rolled sheet in the delivery condition. Group strength К270В
≤2 - 270-410 - ≥25 - - - - ≤65
2-3.9 - 270-410 - ≥28 - - - - ≤65
Cold roll for the enamelware according to GOST 24244-80 in the state of delivery (specify a group to exhaust the category of the quality)
0.5-1.5 ≥250 270-368 - ≥30 - ≥36 - - -
1.5-2 ≥235 270-368 - ≥30 - ≥36 - - -
2-2.5 ≥235 270-368 - ≥32 - ≥36 - - -
0.5-2 - 255-362 - ≥28 - ≥34 - - -
2-2.5 - 255-362 - ≥30 - ≥34 - - -
0.5-2 - 265-382 - ≥26 - - - - -
2-2.5 - 265-382 - ≥29 - - - - -
0.5-2 - 265-382 - ≥25 - - - - -
2-2.5 - 265-382 - ≥28 - - - - -
Steel grooved on delivery
≤25 - ≥372 ≥8 - - - ≥55 - -
Leaves heat-treated 1 and 2nd categories
- - 275-410 ≥32 - - - - ≤114 -
Tape
- - 315-440 - ≥17 - - - - -
- - 440-590 - ≥4 - - - - -
- - 375-510 - ≥7 - - - - -

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
d4 Elongation after rupture
d Elongation after rupture
d10 Elongation after rupture
y The relative narrowing
HRB Rockwell hardness (indenter steel, spherical)

Technological properties

Name The value
Weldability Without limitation, except HTO parts; welding methods: SMAW, submerged arc ADS and gateway protection of the CCC.
Propensity to temper brittleness Tend not.
Forging temperature Beginning - 1300 °C, end - 700 °C. air Cooling.
Flock-sensitive sensitivity not sensitive.
Workability by cutting In hot rolled state at 99-107 blower SB and HB=450 MPa Kn TV.SPL.=Of 2.1 Kn b.St.=1,6.

Our consultant will save your time

+49(1516) 758 59 40
E-mail:
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
Inconel 600, brkmts3-1 wire, Bronze leaf, Trumpet brass, pipe 06hn28mdt