Steel 08Г2ФЛ
36CrNrL steel
Steel 40G1
Steel 35KhNML
Steel 35KhNL
Steel 35KhN2ML
Steel 35KhN2VL
Steel 35KhML
Steel 35KhGFL (35KhGF)
Steel 35KhGSL
35KhGL steel
Steel 35NGML
Steel 35GTRL
Steel 35GL
Steel 32X06L
30KhNML steel
30KhML steel
30XL steel
30ХГФРЛ steel
Steel 30ХГСФРЛ
30KhGSFL steel
30KhG1 steel
Steel 30Х3С3ГМЛ
30GSL steel
30GL steel
Steel 5MFRL
X8ML steel
X15L steel
KPL steel
VKL-5 steel
Steel 80GSL
Steel 75KhNMFL
Steel 70X2GL
70GL steel
Steel 60KhGL
5KhNML steel
Steel 5FL
Steel 28X11ML
Steel 55SL
50KhGL steel
Steel 45FL
45GL steel
40KhFL steel
40KhNL steel
40KhN2L steel
40KhML steel
40KhL steel
40KhGRL steel
40GTL steel
Steel 12Х2НМЛ (VKL-3М)
20GL steel
16KhGTL steel
Steel 16Х3МФЛ
15XL steel
15KhGSML steel
Steel 15Х1М1ФЛ
15GNFL steel
15GNL steel
15GL steel
Steel 13KhNDFTL
Steel 12Х7Г3СЛ
20GML steel
Steel 12Х2НВМЛ (VKL-3)
Steel 12DKhN1MFL
Steel 12DN2FL
08TL steel
Steel 08N6G4ML
08GNFL steel
08GNL steel
Steel 08GDNL (SL-30)
08G2FL steel
Steel 03N12H5M3TUL
Steel 03N12H5M3TL
20XL steel
Steel 25KhGSL
Steel 25KhGL
Steel 25Х2ГНМФЛ
Steel 25GSL
Steel 23ХГСС2МФЛ
Steel 23GNMFL
20KhNFL steel
20KhNL steel
20XHN3L steel
20KhMFL steel
20KhML steel
Steel 27Х5GSML
20KhGSL steel
Steel 20Х3МВФЛ (ЭИ415Л)
20FL steel
20DHL steel
20GFL steel (20G1FL)
20GTL steel
20GSL steel
20GNFL steel
20GNMYL steel
20GNMFL steel
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | 08Г2ФЛ |
| Designation GOST Latin | 08G2FL |
| Transliteration | 08G2FL |
| The chemical elements | 08Mn2V |
Description
08Г2ФЛ steel is used: for the manufacture of large castings of body parts shipbuilding section up to 400 mm.
Note
Cold-resistant, dispersion-hardening steel of pearlitic class.
Standards
| Name | Code | Standards |
|---|---|---|
| Castings, steel | В82 | OST 5Р.9285-95 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | Cu | V |
|---|---|---|---|---|---|---|---|---|---|---|
| OST 5Р.9285-95 | 0.06-0.1 | ≤0.03 | ≤0.03 | 1.3-1.7 | ≤0.3 | 0.15-0.4 | 0.8-1.1 | The rest | 0.6-0.8 | 0.1 |
Fe is the basis.
According to OST 5R.9285-95, the content of chromium up to 0.50% and molybdenum up to 0.12% is not a defect sign provided that the requirements of the standard are observed and if there are no special instructions in the technical conditions of the order or drawing. Vanadium is introduced by calculation.
According to OST 5R.9285-95, in the case of steel smelted in the main electric furnaces as cold-resistant (technical conditions of the order or requirements of the drawing), the sulfur and phosphorus content should not be more than 0.020% of each. As agreed by the manufacturer with the developer OST 5P.9285-95 (CRI "Prometey"), the content of sulfur and phosphorus is allowed up to 0.030% of each.
In steel smelted in an open-hearth furnace, the carbon content is allowed not more than 0.12%, the content of sulfur and phosphorus is not more than 0.035% of each.
According to OST 5R.9285-95, the content of chromium up to 0.50% and molybdenum up to 0.12% is not a defect sign provided that the requirements of the standard are observed and if there are no special instructions in the technical conditions of the order or drawing. Vanadium is introduced by calculation.
According to OST 5R.9285-95, in the case of steel smelted in the main electric furnaces as cold-resistant (technical conditions of the order or requirements of the drawing), the sulfur and phosphorus content should not be more than 0.020% of each. As agreed by the manufacturer with the developer OST 5P.9285-95 (CRI "Prometey"), the content of sulfur and phosphorus is allowed up to 0.030% of each.
In steel smelted in an open-hearth furnace, the carbon content is allowed not more than 0.12%, the content of sulfur and phosphorus is not more than 0.035% of each.
Mechanical characteristics
| sT|s0,2, MPa | σB, MPa | d | y, % | kJ/m2, кДж/м2 | Brinell hardness number, MPa |
|---|---|---|---|---|---|
| Castings for shipbuilding. 1-I Normalization at 930-970 °C + 2-I Normalization at 910-940 °C + vacation at 590-650 °C, air cooling | |||||
| ≥350 | ≥450 | ≥20 | ≥45 | ≥800 | 120-167 |
| Castings for shipbuilding. Normalization at 930-970 °C + quenching in water from 910-940 °C + vacation at 590-650 °C, air cooling | |||||
| ≥370 | ≥470 | ≥20 | ≥45 | ≥800 | 120-167 |
Description mechanical marks
| Name | Description |
|---|---|
| sT|s0,2 | Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
| σB | Limit short-term strength |
| d | Elongation after rupture |
| y | The relative narrowing |
| kJ/m2 | Toughness |
Technological properties
| Name | The value |
|---|---|
| Weldability | welded without any restrictions. The welding process - SMAW. With a significant amount of welding it is recommended that subsequent vacation. |
