Alloy VT6S
Designation
| Name |
The value |
| Designation GOST Cyrillic |
ВТ6С |
| Designation GOST Latin |
BT6C |
| Transliteration |
VT6S |
| The chemical elements |
ВTe6Pb |
Description
Alloy VT6S is used: for the manufacture of semi-finished products (sheets, strips, foils, strips, plates, bars, rods, profiles, tubes, forgings and forged blanks) by the strain, and bars; cylinders operating under pressure.
Standards
| Name |
Code |
Standards |
| Non-ferrous metals, including rare metals, and their alloys |
В51 |
GOST 19807-91, OST 1 90000-70, OST 1 90013-81 |
| Sheets and stripes |
В53 |
GOST 22178-76, OST 1 90218-76, OST 1 90024-94, TU 1-5-419-82, TU 1-5-424-77, TU 1-92-40-76 |
| Bars |
В55 |
GOST 26492-85, OST 1 90266-86, OST 1 90173-75, OST 1 90107-73, OST 1 90006-86, TU 1-9-672-78 |
| Pipes from non-ferrous metals and alloys |
В64 |
TU 1-5-421-78 |
Chemical composition
| Standard |
C |
Si |
Fe |
N |
Al |
V |
Ti |
O |
Zr |
H |
| GOST 19807-91 |
≤0.1 |
≤0.15 |
≤0.25 |
≤0.04 |
5.3-6.5 |
3.5-4.5 |
The rest |
≤0.15 |
≤0.3 |
≤0.015 |
| OST 1 90013-81 |
≤0.1 |
≤0.1 |
≤0.25 |
≤0.05 |
5.3-6.5 |
3.5-4.5 |
The rest |
≤0.15 |
≤0.3 |
≤0.015 |
Ti is the basis.
According to GOST 19807-91 and OST 1 90013-81 the total content of other impurities is ≤ 0.30%. The mass fraction of hydrogen is indicated for ingots. The mass fraction of chromium and manganese should not exceed 0.15% (in total). The mass fraction of copper and nickel should not be more than 0.10% (in total), including nickel not more than 0.08%.
Mechanical characteristics
| Section, mm |
σB, MPa |
d5, % |
d |
y, % |
kJ/m2, кДж/м2 |
Brinell hardness number, MPa |
| Rolled sheet after annealing (samples across the direction of rolling) |
| 1-6 |
834-981 |
≥12 |
- |
- |
- |
- |
| 6-10.5 |
834-981 |
≥10 |
- |
- |
- |
- |
| Rolled sheet. Quenching + artificial aging (samples across the direction of rolling) |
| 1-10.5 |
≥1030 |
≥8 |
- |
- |
- |
- |
| Plate on OST 1 90024-94 in the delivery condition. Samples heat-treated (transverse) |
| 11-30 |
1030-1180 |
- |
≥5 |
≥12 |
≥343 |
- |
| 11-25 |
835-1030 |
- |
≥7 |
≥16 |
≥392 |
- |
| 25-60 |
835-1030 |
- |
≥7 |
≥16 |
≥392 |
- |
| 60-100 |
835-1030 |
- |
≥7 |
≥16 |
≥392 |
- |
| Forgings weighing up to 200 kg after annealing |
| 101-250 |
755-981 |
≥6 |
- |
≥20 |
≥392 |
241-321 |
| 100 |
834-981 |
≥10 |
- |
≥30 |
≥392 |
241-321 |
| Bars hot rolled quenched and aged normal-quality according to GOST 26492-85 (longitudinal samples) |
| 10-12 |
≥1030 |
≥4 |
- |
≥14 |
- |
- |
| 12-100 |
≥1030 |
≥4 |
- |
≥14 |
≥245 |
- |
| Bars hot rolled quenched and aged high-quality according to GOST 26492-85 (longitudinal samples) |
| 10-12 |
≥1030 |
≥6 |
- |
≥20 |
- |
- |
| 12-100 |
≥1030 |
≥6 |
- |
≥20 |
≥294 |
- |
| Bars hot rolled autogenie ordinary quality GOST 26492-85 (longitudinal samples) |
| 10-12 |
≥835 |
≥9 |
- |
≥22 |
- |
- |
| 100-150 |
≥755 |
≥6 |
- |
≥15 |
≥245 |
- |
| 12-100 |
≥835 |
≥9 |
- |
≥22 |
≥294 |
- |
| Bars hot rolled autogenie high-quality according to GOST 26492-85 (longitudinal samples) |
| 10-12 |
835-980 |
≥10 |
- |
≥30 |
- |
- |
| 100-150 |
755-980 |
≥7 |
- |
≥22 |
≥392 |
- |
| 12-60 |
835-980 |
≥10 |
- |
≥30 |
≥392 |
- |
| 60-100 |
835-980 |
≥10 |
- |
≥25 |
≥392 |
- |
| Forged square bars and round after annealing |
| 140-250 |
755-981 |
≥6 |
- |
≥20 |
≥392 |
241-321 |
|
834-981 |
≥8 |
- |
≥25 |
≥392 |
241-321 |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| σB |
Limit short-term strength |
| d5 |
Elongation after rupture |
| d |
Elongation after rupture |
| y |
The relative narrowing |
| kJ/m2 |
Toughness |
Technological properties
| Name |
The value |
| Weldability |
without restrictions |
