Alloy ТС6
Alloy VT8M-1
Alloy VT32
Alloy VT35
Alloy VT4
Alloy VT41
Alloy VT5
Alloy VT5-1
Alloy VT6 (VT6sv.)
Alloy VT6C
Alloy VT6h
Alloy VT8
Alloy VT8-1
Alloy VT3-1
Alloy VT9
OT4 alloy
Alloy OT4-0
Alloy OT4-1
Alloy OT4-2
Alloy PT-1M
Alloy PT-3B
Alloy PT-7M
Alloy SPT-2
Alloy TC5
Alloy TC6
Alloy VT15
Alloy 14
Alloy 19
Alloy 27
Alloy 2B
Alloy 37
Alloy 3M
Alloy 40
Alloy 5B
Alloy AT3
Alloy AT6
Alloy VT14
Alloy VT25U
Alloy VT16
Alloy VT18
Alloy VT18U
Alloy VT2 (VT2sv.)
Alloy VT20
Alloy VT20-1 (VT20-1sv.)
Alloy VT20-2 (VT20-2sv.)
Alloy VT22
Alloy VT22I
Alloy VT23
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ТС6 |
| Designation GOST Latin | TC6 |
| Transliteration | TS6 |
| The chemical elements | TePb6 |
Description
Alloy ТС6 used: for the manufacture of tubes and pipes; cavitation resistant parts and products; springs for chemical industry, aviation and space equipment; parts with a variable wall thickness by rotation of the hood.
Note
Titanium alloys with the structure of pseudo-β.
Standards
| Name | Code | Standards |
|---|---|---|
| Non-ferrous metals, including rare metals, and their alloys | В51 | TU 1-5-064-87 |
| Sheets and stripes | В53 | TU 1-5-066-87 |
| Bars | В55 | TU 1-5-104-87 |
| Pipes from non-ferrous metals and alloys | В64 | TU 1-5-127-73 |
Chemical composition
| Standard | C | Cr | Si | Fe | N | Al | V | Ti | Mo | O | Zr | H |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TU 1-5-127-73 | ≤0.1 | 9.4-11.5 | ≤0.15 | ≤0.5 | ≤0.04 | 2.3-3.6 | 6.4-7.8 | The rest | 3.5-4.5 | ≤0.15 | 0.1-1.2 | ≤0.015 |
Ti is the basis.
According to TU 1-5-127-73 the amount of other impurities (not specified) should be ≤ 0.30%.
According to TU 1-5-127-73 the amount of other impurities (not specified) should be ≤ 0.30%.
Mechanical characteristics
| Section, mm | sT|s0,2, MPa | σB, MPa | d5, % | y, % | kJ/m2, кДж/м2 | Brinell hardness number, MPa |
|---|---|---|---|---|---|---|
| Sheet. Quenching + Aging | ||||||
| - | 1520-1590 | 1580-1635 | 5.5-6 | - | - | 341-344 |
| The tubular billet. Annealing | ||||||
| 15х15 | 785-883 | 834-932 | ≥15 | ≥45 | ≥784 | - |
Description mechanical marks
| Name | Description |
|---|---|
| Section | Section |
| sT|s0,2 | Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
| σB | Limit short-term strength |
| d5 | Elongation after rupture |
| y | The relative narrowing |
| kJ/m2 | Toughness |
