By visiting this site, you accept the use of cookies. More about our cookie policy.

CrN40MDB-vi (circle, wire, tube, sheet, strip) (ep937-vi)

Relevance

Alloy of this grade is used in the production of chemical welded equipment operating in solutions of hydrochloric acid, phosphoric acid, sulfuric acid, in acetic and halocarbon acids. This alloy is used to produce equipment that is necessary for the synthesis of acetic acid from methanol and carbon oxide, ion exchange resins, polypropylene, chemical-pharmaceuticals and other products of organic synthesis. Pipe made of this alloy can be used in low and high pressure conditions in pipelines for oil, gas in the industrial petrochemical industry; in high pressure systems in the nuclear and thermal energy.

Chemical composition

Ni C Cu Cr Ce Fe Mn Mo Al N Mn Si Y
39 - 42 ≤0,03 1,5 - 2,2 20 - 22 ≤ 0,03 Base 0,8 - 1,5 5 - 6,5 ≤0,2 ≤0,03 0,8 - 1,5 ≤0,2 ≤0,2

Production

Alloy grade of CrN40MDB-VI is heat-resistant high-alloy steel. It is produced in accordance with the following specifications: 14-1-2131-77; 14-1-2149-77; 14-1-2121-77. The alloy contains nickel 39-42%, chromium 20-22%, in this connection it can be called chrome-nickel alloy. Silicon, phosphorus, manganese, niobium, copper and sulfur are used as additives. It is melted in vacuum induction furnaces. The temperature of steel forging is 1170 °C at the beginning and about 850 °C at the end. The finished product with a cross-section not exceeding 350 mm is air-cooled. Steel tubes of this grade are mostly produced with round cross-section, and on request with oval, rectangular and square cross-section.

Classification

KhN40MDB-VI pipes are classified by diameter and by wall thickness. With diameter of 5-250 mm and wall thickness of 0.3-6 mm the tubes are qualified as extra thin-walled. Thin-walled pipes have a diameter of 5-250 mm and a wall thickness of 0.6-20 mm. Thick-walled tubes have a diameter of 6-250 mm and wall thickness of 1.6-24 mm. Particularly thick-walled tubes are produced with a diameter of 6 to 70 mm and wall thickness of 2 to 12 mm.

Supplies

Bars with a diameter of less than 9 mm are sold in coils, while tubes with a thickness of more than 9 mm can be supplied in straight lengths - short, measured or in multiples of measured lengths. High-alloyed quality steel allows producing standard length of 1 - 6 m. To order from alloyed steel ep937-vi is produced round, wire, sheet, strip of any parameters. We have the best price-quality ratio for the whole range of products.

Supplier

The supplier "Auremo" offers to buy ХН40МДБ-vi, ep937-vi (circle, wire, tube, sheet, strip) today on favorable terms. Large selection in stock. Conformity to GOST and international quality standards. Always in stock of CrN40MDB-vi, ep937-vi (round, wire, pipe, sheet, strip), the price is the best from the supplier. Buy CrN40MDB-vi, ep937-vi (round, wire, tube, sheet, strip) today. Wholesale customers price - favorable.

Buy a bargain price.

Supplier "Auremo" offers on favorable terms to buy CHN40MDB-vi, ep937-vi (circle, wire, pipe, sheet, strip)) without a surcharge on additional costs. The company's website shows the most current information about products, there is a product catalog and price lists. It is possible to buy products with non-standard parameters to order. The price of the order depends on the volume and additional terms of delivery. The supplier "Auremo" invites to buy ep937-vi (circle, wire, tube, sheet, strip) by wholesale or in installments. We have the best price-quality ratio for the entire range of products. In this segment the company "Auremo" - a profitable supplier. We are waiting for your orders.

Our consultant will save your time

+49 (170) 650 7006
E-mail:
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)