By visiting this site, you accept the use of cookies. More about our cookie policy.

NP1A-id (circle, wire, tube, sheet, strip)


Alloy grade NP1A-ID on nickel base is melted in vacuum induction furnaces. It is produced in accordance with the following specifications: 48-0814-11/0-83; 14-3-1591-88; 48-0815-84-92; 48-0815-80-92. The composition contains pure nickel and up to 0.5% of impurities (iron, silicon, lead, manganese, copper, magnesium, sulfur, bismuth, carbon, arsenic, antimony, cadmium, tin, zinc, phosphorus). Nickel, is obtained by electrolysis, the method of decomposition into components of complex substances,.


Nickel was originally in demand only among jewelers, while in industry such a metal was unprofitable to use because of the expensive technology of obtaining and unavoidable impurities. Nowadays this nickel alloy is used in the production of chemical welded equipment operating in aggressive environments (hydrochloric, phosphoric, sulphuric acid solutions, acetic and hydrogen halide acids, etc.) at temperatures of -70 + 500 °C and pressures not exceeding 1.6 N/mm². This alloy is used for the synthesis of acetic acid from methanol and carbon oxide, ion exchange resins, polypropylene, chemical-pharmaceuticals and other organic synthesis products.

Percentage composition

Ni Cu Mn Mg Fe> C S
Basis ≤0,006 ≤0,003 ≤0,035 ≤0,023 ≤0,023 ≤0,004

Alloy density is 8.9 g/cm³; thermal conductivity coefficient is 0.92 - 100, W/(m - K). The most popular semi-finished products: rounds, wires, tubes.

Technical characteristics

Nickel is a very hard, ductile and malleable metal. It can be easily polished and gets a protective film in the air at ambient temperature which is resistant to corrosion. It is part of heat-resistant alloys that can withstand gaseous and liquid aggressive media and heat up to 850 °C. Nickel can be processed in many different ways because of its plasticity: rolling, turning, drawing, stamping and welding. Nickel can easily be used for different rolled products like strips, wires, sheets and so on.

Application of

Their main area of application is industrial chemistry, experimental physics, pulp and paper industry. Tubes are in demand for the distillation of alkalis and acids. Sheets and tape are very popular in electrical engineering and instrumentation. Such sheets and wire are generally used as anodes and cathodes and in the production of refined nickel. Nickel plating is the deposition of a nickel layer 50 to 125 µm thick on the surface of another metal. Parts coated with nickel are found in automobiles, bicycles, musical and medical instruments, and household appliances. Nickel-plated parts are also used in mechanisms, which are subjected to severe dry friction.


Where to buy NP1A-id (circle, wire, tube, sheet, strip) in bulk or in installments? Supplier Auremo offers to buy NP1A-id (circle, wire, tube, sheet, strip) today on favorable terms. We have the best price-quality ratio for the entire range of products. Large selection of semi-finished products in stock. Conformity to GOST and international quality standards, the price - the best from the supplier. Buy NP1A-id (round, wire, tube, sheet, strip) today. Wholesale customers preferential price.

Buy a bargain price.

Company "Auremo" offers to buy NP1A-id (circle, wire, tube, sheet, strip) on favorable terms. In stock the widest range of products. Always available NP1A-id (circle, wire, tube, sheet, strip), the price - due to the technological features of production without the inclusion of additional costs. Buy today. Excellent consumer characteristics. Optimal price from the supplier. We are waiting for your orders.

Our consultant will save your time

+49(1516) 758 59 40


Special offers and discounts. :)