CrN55VMTKU (circle, wire, tube, sheet, strip) (ei929)
Relevance
Heat-resistant steel of this grade belongs to the group of alloys with a limited service life and is used in the manufacture of turbine blades, as well as other parts for work at temperatures not exceeding 950 °C. The process of intense scale formation initially begins above 1,050°C.
Requirements
The main requirements to the material for turbine blades are caused by the latest developments in engine designs, continuous increase in ductility, low-cycle fatigue resistance, thermal fatigue, heat resistance and resistance to gases. Material in modern engines for turbine blades must have high resistance to fracture under thermal, low-cycle fatigue, which is the main type of fracture today. The danger of failure can be exacerbated by surface reactions that occur due to softening of grain boundaries and gas corrosion.
Percentage composition,
| Cr | Co | W | Ti | Ni | Mn | Si | C | S | P | Mo | B | V | Al | Fe |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9 - 12 | 12 - 16 | 4.5 - 6.5 | 1.4 - 2 | 54-56 |
≤ 0.5 | ≤ 0.5 | 0.04 - 0.1 | ≤ 0.01 | ≤ 0.015 | 4 - 6 | ≤ 0.02 | 0.2 - 0.8 | 3.6 - 4.5 | Residue |
The hardness of this alloy grade after quenching, aging is HB 10 -1 = 285 - 341MPa. Produced from this alloy rod is based on
Physical characteristics of ei929 depending on the temperature
| J/(kg-grad) | MPa | Ohm-m | kg/m3 | Grad | 1/Grad |
|---|---|---|---|---|---|
| C | E 10- 5 | R 10 9 | r | T | a 10 6 |
| 900 | 15.5 | ||||
| 800 | 14.5 | ||||
| 700 | 14.1 | ||||
| 600 | 13.8 | ||||
| 500 | 13.4 | ||||
| 400 | 12.8 | ||||
| 300 | 12.4 | ||||
| 200 | 11.7 | ||||
| 100 | 10.8 |
Delivery
Wire with diameter less than 9mm is sold in coils, while wire with thickness less than 9mm is supplied in straight lengths: unfinished, measured or in multiples of measured lengths. High-alloyed quality steel allows the production of standard length of 1 - 6 m. To order from steel ep543U is produced round, wire, sheet, pipe, strip of any parameters. We have the best price-quality ratio for the whole range of products.
The supplier
The supplier "Auremo" offers to buy ХН55ВМТКЮ, ei929 (circle, wire, tube, sheet, strip) today on favorable terms. A large selection in stock. Conformity to GOST and international quality standards. Always in stock XN55VMTKYu, ei929 (circle, pipe, ribbon, sheet), price - best from a supplier.
Buy, bargain price.
Supplier "Auremo" offers to buy CHN55VMTKYu, ei929 (circle, wire, pipe, sheet, strip)) on favorable terms without a surcharge on additional costs. The site of the company displays the most current information about products, there is a product catalog and price lists. Always in stock ei929 (circle, wire, pipe, sheet, strip)), the price - the best from the supplier. Buy today. It is possible to buy products under the order of non-standard parameters. The order price depends on volume and additional terms of delivery. Supplier "Auremo" invites you to buy CrN55VMTKU, ei929 (circle, wire, tube, sheet, strip) in bulk or in installments. We have the best price-quality ratio for the entire range of products. In this segment the company "Auremo" - a profitable supplier. We are waiting for your orders.
