CrN50MVKTYR-id (circle, wire, tube, sheet, strip) (ep99-id)
Alloying
Alloying is a high-alloyed heat-resistant steel, which contains 50% nickel as well as chrome, carbon, phosphorous, sulphur, copper, aluminum, titanium, cerium and niobium. The purpose of alloying is to increase the technological properties of products: heat and heat resistance, the ability to withstand aggressive environments. Excessive alloying increases the cost of the alloy and, therefore, the process must be economical: the steel must be technologically advanced and its performance indicators must meet the required level. The heat-resistant and high-temperature resistant steel in this grade represents the optimum balance of cost and quality.
Processing
The steel is produced in an open arc furnace. The rolling process starts at 1170 °C and ends at 850 °C. The steel is cooled after deformation. The first mode involves cooling in water, oil or air, while the second mode involves cooling with water, followed by holding the products for 4-4.5 hours. The bars are made by hot-rolled method and by calibration - to give the products the exact outer diameter. KhN50MVKTYR-id steel is welded with KTI-762 electrodes.
Application
Rolled steel from this alloy is designed to operate at temperatures around 1050 ° C. Welds in this case, must have the same requirements for heat resistance and heat resistance, which depends on the choice of welding materials, welding modes, additional heat treatment. Pipes are used under conditions of low and high pressure in pipelines for oil, gas in the industrial petrochemical industry; in high pressure systems in nuclear and thermal power. Pipes are widely used in industrial construction. Bar - as a feedstock in the production of a variety of profiles and fasteners. Often, customers of polished and ground pipe KhN50MVKTUR-id are construction and advertising companies.
Supply
Bar with a diameter of less than 9 mm, sold in coils, and thicker than 9 mm it is supplied in straight pieces: unmeasured, measured, as well as multiples of measured. High-alloyed quality steel allows producing standard length of 1 - 6 m. To order from alloyed steel ep543U is produced round, wire, sheet, pipe, strip of any parameters. We have the best price-quality ratio for the whole range of products.
Supplier
Supplier "Auremo" offers to buy CrN50MVKTUR-id, ep99-id (circle, wire, tube, sheet, strip) today on favorable terms. Large selection in stock. Conformity to GOST and international quality standards. Always in stock of CrN50MVKTUR-id, ep99-id (rod, pipe, sheet), price - the best from the supplier. Buy CHN50MVKTUR-id, ep99-id (rod, wire, pipe, sheet, strip) today. Wholesale customers favorable price.
Buy a bargain price.
Supplier "Auremo" offers on favorable terms CHN50MVKTUR-id, ep99-id (circle, wire, pipe, sheet, strip)) without a surcharge on additional costs. The site displays the most current information about products, there is a product catalog and price lists. Always in stock ep99-id (circle, wire, tube, sheet, strip)), the price - the best from the supplier. Buy today. It is possible to buy products under the order of non-standard parameters. The order price depends on volume and additional terms of delivery. Supplier "Auremo" invites to buy CrN50MVKTYR-id, ep99-id (circle, wire, pipe, sheet, strip) in bulk or in installments. Auremo is a profitable supplier in this segment. Buy ep99-id (circle, wire, sheet, strip)) today. The best price from the supplier. We are waiting for your orders.
