By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel SV-10ХМФТУ-

Steel Sv-10GN3SMD Sv-08GSMT steel Steel Sv-08H15N23V7G7M2 (EP88) Steel Св-08Х19Н10Г2Б (ЭИ898; Н-89) Steel Sv-08X1Du Steel Св-08Х20Н9С2БТЮ (EP156) Steel Св-08Х25Н20С3Р1 (EP532) Steel Sv-08HG2SDU Sv-08HN2GMTA steel Sv-09HNMTA steel Sv-09HNMTAA steel Sv-09HN4MDTA steel Sv-10HN1MA steel Sv-10HN2SMD steel Sv-08GM steel Sv-10GSM steel Sv-10Nu steel Steel Sv-10Kh16N25AM6 (EI395; H-66) Steel Св-10Х16Н25М6АФ (ЗИ112) Steel Sv-10H19N11M4F (EP647) Sv-10H19H23G2M5FAT (EP868) Steel Sv-10Х21Н11ФТ (EP854) Sv-10X2M steel Sv-10HGSN2MT steel Sv-10KhMFTU steel Sv-10KhMFTU-A steel Sv-12M steel Sv-12Kh2NMA steel Steel Sv-06H15N35G7M6B (EP582) Steel Sv-01Kh12N6M (ChS48) Steel Св-01Х19Н18Г10АМ4 (EP690) Steel Sv-03GKhN2MD Steel Sv-03GKhN3MD Steel Sv-03HN3MD Sv-04N2GSTA steel Sv-04N2GTA steel Sv-04N3GMTA steel Sv-04N3GSMTA steel Steel Sv-04H19H11M3 (H-65) Sv-04Cr19Ni (04Cr19N9) steel Sv-04H20N10G2B (EP762) Sv-06H14GMFBA steel Steel Sv-08GN2SMD Steel Sv-06Х21Н7БТ (EP500) Sv-06Cr3G2SmFtu4 steel Sv-06Kh8G2SMFtu4 steel Steel Sv-07H22H13G5ST (ChS49) Steel Sv-07Cr25H13 (H-71) Steel Sv-07CGSN3MD Steel Sv-07HN3MD Sv-08 steel Sv-08G1NMT steel Sv-08G1S steel Sv-08G2SM steel Sv-08G2SNMT steel Sv-08G2SNTYR steel To access the entire list

Designation

Name The value
Designation GOST Cyrillic Св-10ХМФТУ-А
Designation GOST Latin Cb-10XMFTU-A
Transliteration Sv-10HMFTU-A
The chemical elements 10CrMoVTiC-

Description

Steel SV-10ХМФТУ AND used: for the production of welding wire with a diameter of 1.6 to 6.0 mm used in nuclear power engineering and petrochemical engineering; in combination with flux an-42 for manual and automatic welding under the flux layer of heat-resistant steels pearlitic class of reactor vessels and other nuclear power equipment; steel type 15Х2МФА and 15Х2МФА (A) various modifications category КП45 strength at 350 °C in thicknesses up to 400 mm, including a narrow-gap butchering.

Note

Corrosion-resistant steel.

Standards

Name Code Standards
Welding and cutting of metals. Soldering, riveting В05 TU 14-1-4818-2008

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu N As Al V Ti Mo Sn Sb Co
TU 14-1-4818-2008 0.1-0.12 ≤0.006 ≤0.006 0.5-0.7 1.6-1.8 0.15-0.25 0.2-0.25 The rest ≤0.06 ≤0.015 ≤0.08 ≤0.015 0.2-0.25 0.05-0.1 0.5-0.6 ≤0.001 ≤0.005 ≤0.02
Fe is the basis.
According to TU 14-1-4818-2008 the chemical composition is given for steel grade Sv-10KhMFTU-A. The mass fraction of antimony and tin in steel on the first five batches is not a rejection sign. In the steel, deviations in chemical composition are allowed: according to the chemical composition ± 0.010%, sulfur and phosphorus +0.0010%, copper +0.010%, silicon ± 0.010%, manganese ± 0.050%, nickel ± 0.030%, chromium ± 0.050%, for molybdenum ± 0.050%.

Technological properties

Name The value
Features of production The surface of wire should be clean and smooth, without cracks, delaminations, captured, sunsets, shells, dents, scale, rust, oil and other contaminants. On the surface of the wire allowed the risks (including covered), scratches, local Rabina and individual dents. The depth of these defects shall not exceed tolerances for the wire diameter. On the surface of the wire allowed the traces of soap and grease and plaque hydroxide.

Our consultant will save your time

+49(1523) 72 15 100
E-mail: info@auremo.eu
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
titanium plate, Incoloy 800, 29nk pipe, XH78T wire, 15h25t sheet