Steel SV-08Х25Н20С3Р1 (ЭП532)
Designation
| Name |
The value |
| Designation GOST Cyrillic |
Св-08Х25Н20С3Р1 |
| Designation GOST Latin |
Cb-08X25H20C3P1 |
| Transliteration |
Sv-08H25N20S3R1 |
| The chemical elements |
08Cr25Н20С3B1 |
| Name |
The value |
| Designation GOST Cyrillic |
ЭП532 |
| Designation GOST Latin |
EP532 |
| Transliteration |
EhP532 |
| The chemical elements |
- |
Description
Steel SV-08Х25Н20С3Р1 used: for the production of welding wire with a diameter of 1.2−6.0 mm used in automated welding.
Note
Corrosion-resistant, chromium-Nickel boron-added steel.
Standards
| Name |
Code |
Standards |
| Welding and cutting of metals. Soldering, riveting |
В05 |
TU 14-1-4981-91 |
Chemical composition
| Standard |
C |
S |
P |
Mn |
Cr |
Si |
Ni |
Fe |
B |
| TU 14-1-4981-91 |
≤0.1 |
≤0.02 |
≤0.03 |
≤1.5 |
24-27 |
2.5-3 |
18-21 |
The rest |
0.4-0.7 |
Fe is the basis.
According to TU 14-1-4981-91, the chemical composition is given for steel grade Sv-08X25N20S3P1 (EP532).
Mechanical characteristics
| Section, mm |
σB, MPa |
| Wire in the delivery state on the other 14-1-4981-91 |
| 1-1.6 |
880-1670 |
| 2 |
780-1420 |
| 2 |
690-1030 |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| σB |
Limit short-term strength |
Technological properties
| Name |
The value |
| Features of production |
The surface of wire should be clean and smooth, without cracks, delaminations, captured, sunsets, shells, dents, scale, rust, oil and other contaminants. On the surface of the wire allowed the risks (including covered), scratches, local Rabina and individual dents. The depth of these defects shall not exceed tolerances for the wire diameter. Wire comes in etched and bleached condition. |
