By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel SV-06Х3Г2СМФТЮ4

Designation

Name The value
Designation GOST Cyrillic Св-06Х3Г2СМФТЮ4
Designation GOST Latin Cb-06X3G2CMFTJu4
Transliteration Sv-06H3G2SMFTYu4
The chemical elements 06Cr3Mn2СMoVTiAl4

Description

Steel SV-06Х3Г2СМФТЮ4 used: for the production of wire rod intended for the production of welding wire.

Note

A steel alloy.

Standards

Name Code Standards
Sectional and shaped rolling В32 TU 14-1-2203-77

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu Al V Ti Mo Ba
TU 14-1-2203-77 ≤0.09 ≤0.03 ≤0.03 1.8-2.2 2-4.5 0.6-0.85 ≤0.3 The rest ≤0.25 0.2-0.4 0.1-0.3 0.05-0.12 0.9-1.2 0.1
Fe is the basis.
According to TU 14-1-2203-77 the chemical composition is given for a welding wire of the brand Sv-06H3G2SMFTYU4. In rod, not intended for copper-clad wire, the copper content should not exceed 0.25%, and at the request of the consumer - not more than 0.20%. In steel, the aluminum content is allowed to be 0.20-0.40%, vanadium 0.10-0.30%, REM 0.010-0.060, and barium is added to 0.10% by calculation.

Technological properties

Name The value
Macrostructure and contamination In the macrostructure of wire rod, are not allowed discontinuity of the metal caused by the presence of shrinkage, axial looseness, bubbles, cracks, delamination and inclusions.
Microstructure Wire rod microstructure should be uniform. Padalka (martensitic and toostonedtocare areas) is not allowed.

Our consultant will save your time

+49 (170) 650 7006
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)