Steel SV-06Х21Н7БТ (ЭП500)
Designation
| Name |
The value |
| Designation GOST Cyrillic |
Св-06Х21Н7БТ |
| Designation GOST Latin |
Cb-06X21H7BT |
| Transliteration |
Sv-06H21N7BT |
| The chemical elements |
06Cr21Н7NbTi |
| Name |
The value |
| Designation GOST Cyrillic |
ЭП500 |
| Designation GOST Latin |
EP500 |
| Transliteration |
EhP500 |
| The chemical elements |
- |
Description
Steel SV-06Х21Н7БТ used: for the production of welding wire diameter 2.0−6.0 mm used in automated welding.
Note
Korrozionnostojkoj, chromium-Nickel steel alloyed with niobium and titanium.
Standards
| Name |
Code |
Standards |
| Welding and cutting of metals. Soldering, riveting |
В05 |
TU 14-1-4981-91 |
Chemical composition
| Standard |
C |
S |
P |
Mn |
Cr |
Si |
Ni |
Fe |
Ti |
Nb |
| TU 14-1-4981-91 |
≤0.08 |
≤0.025 |
≤0.025 |
1-2 |
20-22 |
≤0.8 |
6.8-7.8 |
The rest |
0.3-0.6 |
0.6-1 |
Fe is the basis.
According to TU 14-1-4981-91, the chemical composition is given for steel grade Sv-06X21N7BT (EP500).
Mechanical characteristics
| Section, mm |
σB, MPa |
| Wire in the delivery state on the other 14-1-4981-91 |
| 2 |
780-1180 |
| 2 |
690-1030 |
| 2 |
690-980 |
| 2 |
640-930 |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| σB |
Limit short-term strength |
Technological properties
| Name |
The value |
| Features of production |
The surface of wire should be clean and smooth, without cracks, delaminations, captured, sunsets, shells, dents, scale, rust, oil and other contaminants. On the surface of the wire allowed the risks (including covered), scratches, local Rabina and individual dents. The depth of these defects shall not exceed tolerances for the wire diameter. Wire comes in etched and bleached condition. |
