Steel SV-10ГН1МА
Steel Sv-10GN3SMD
Sv-08GSMT steel
Steel Sv-08H15N23V7G7M2 (EP88)
Steel Св-08Х19Н10Г2Б (ЭИ898; Н-89)
Steel Sv-08X1Du
Steel Св-08Х20Н9С2БТЮ (EP156)
Steel Св-08Х25Н20С3Р1 (EP532)
Steel Sv-08HG2SDU
Sv-08HN2GMTA steel
Sv-09HNMTA steel
Sv-09HNMTAA steel
Sv-09HN4MDTA steel
Sv-10HN1MA steel
Sv-10HN2SMD steel
Sv-08GM steel
Sv-10GSM steel
Sv-10Nu steel
Steel Sv-10Kh16N25AM6 (EI395; H-66)
Steel Св-10Х16Н25М6АФ (ЗИ112)
Steel Sv-10H19N11M4F (EP647)
Sv-10H19H23G2M5FAT (EP868)
Steel Sv-10Х21Н11ФТ (EP854)
Sv-10X2M steel
Sv-10HGSN2MT steel
Sv-10KhMFTU steel
Sv-10KhMFTU-A steel
Sv-12M steel
Sv-12Kh2NMA steel
Steel Sv-06H15N35G7M6B (EP582)
Steel Sv-01Kh12N6M (ChS48)
Steel Св-01Х19Н18Г10АМ4 (EP690)
Steel Sv-03GKhN2MD
Steel Sv-03GKhN3MD
Steel Sv-03HN3MD
Sv-04N2GSTA steel
Sv-04N2GTA steel
Sv-04N3GMTA steel
Sv-04N3GSMTA steel
Steel Sv-04H19H11M3 (H-65)
Sv-04Cr19Ni (04Cr19N9) steel
Sv-04H20N10G2B (EP762)
Sv-06H14GMFBA steel
Steel Sv-08GN2SMD
Steel Sv-06Х21Н7БТ (EP500)
Sv-06Cr3G2SmFtu4 steel
Sv-06Kh8G2SMFtu4 steel
Steel Sv-07H22H13G5ST (ChS49)
Steel Sv-07Cr25H13 (H-71)
Steel Sv-07CGSN3MD
Steel Sv-07HN3MD
Sv-08 steel
Sv-08G1NMT steel
Sv-08G1S steel
Sv-08G2SM steel
Sv-08G2SNMT steel
Sv-08G2SNTYR steel
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | Св-10ГН1МА |
| Designation GOST Latin | Cb-10GH1MA |
| Transliteration | Sv-10GN1MA |
| The chemical elements | 10MnН1Mo |
Description
Steel SV-10ГН1МА usedfor producing welding wire diameter 3.0−5.0 mm.
Note
A steel alloy.
Standards
| Name | Code | Standards |
|---|---|---|
| Welding and cutting of metals. Soldering, riveting | В05 | TU 14-1-1549-76 |
| Sectional and shaped rolling | В32 | TU 14-1-2203-77 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | N | Mo |
|---|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-2203-77 | 0.08-0.12 | ≤0.02 | ≤0.02 | 1.1-1.5 | ≤0.3 | 0.15-0.35 | 1.5-1.8 | The rest | ≤0.02 | 0.6-0.75 |
Fe is the basis.
According to TU 14-1-1549-76 deviations from the standards of chemical composition are allowed in accordance with the requirements of GOST 2246. The content of copper, arsenic, vanadium and aluminum in accordance with GOST 2246. The content of nitrogen in the steel prior to the accumulation of data is optional.
According to TU 14-1-2203-77, the chemical composition is given for the welding wire of the brand Sv-10GN1MA. The content of copper, arsenic, vanadium, aluminum - according to GOST 2246, and nitrogen is allowed not more than 0.020%. In rod, not intended for copper-clad wire, the copper content should not exceed 0.25%, and at the request of the consumer - not more than 0.20%.
According to TU 14-1-1549-76 deviations from the standards of chemical composition are allowed in accordance with the requirements of GOST 2246. The content of copper, arsenic, vanadium and aluminum in accordance with GOST 2246. The content of nitrogen in the steel prior to the accumulation of data is optional.
According to TU 14-1-2203-77, the chemical composition is given for the welding wire of the brand Sv-10GN1MA. The content of copper, arsenic, vanadium, aluminum - according to GOST 2246, and nitrogen is allowed not more than 0.020%. In rod, not intended for copper-clad wire, the copper content should not exceed 0.25%, and at the request of the consumer - not more than 0.20%.
Mechanical characteristics
| Section, mm | σB, MPa |
|---|---|
| The welding wire on the other 14-1-1549-76 on delivery | |
| ≤1080 | |
Description mechanical marks
| Name | Description |
|---|---|
| Section | Section |
| σB | Limit short-term strength |
Technological properties
| Name | The value |
|---|---|
| Macrostructure and contamination | In the macrostructure of wire rod, are not allowed discontinuity of the metal caused by the presence of shrinkage, axial looseness, bubbles, cracks, delamination and inclusions. |
| Microstructure | Wire rod microstructure should be uniform. Padalka (martensitic and toostonedtocare areas) is not allowed. |
