Steel SV-08Х1ДЮ
Steel Sv-10GN3SMD
Sv-08GSMT steel
Steel Sv-08H15N23V7G7M2 (EP88)
Steel Св-08Х19Н10Г2Б (ЭИ898; Н-89)
Steel Sv-08X1Du
Steel Св-08Х20Н9С2БТЮ (EP156)
Steel Св-08Х25Н20С3Р1 (EP532)
Steel Sv-08HG2SDU
Sv-08HN2GMTA steel
Sv-09HNMTA steel
Sv-09HNMTAA steel
Sv-09HN4MDTA steel
Sv-10HN1MA steel
Sv-10HN2SMD steel
Sv-08GM steel
Sv-10GSM steel
Sv-10Nu steel
Steel Sv-10Kh16N25AM6 (EI395; H-66)
Steel Св-10Х16Н25М6АФ (ЗИ112)
Steel Sv-10H19N11M4F (EP647)
Sv-10H19H23G2M5FAT (EP868)
Steel Sv-10Х21Н11ФТ (EP854)
Sv-10X2M steel
Sv-10HGSN2MT steel
Sv-10KhMFTU steel
Sv-10KhMFTU-A steel
Sv-12M steel
Sv-12Kh2NMA steel
Steel Sv-06H15N35G7M6B (EP582)
Steel Sv-01Kh12N6M (ChS48)
Steel Св-01Х19Н18Г10АМ4 (EP690)
Steel Sv-03GKhN2MD
Steel Sv-03GKhN3MD
Steel Sv-03HN3MD
Sv-04N2GSTA steel
Sv-04N2GTA steel
Sv-04N3GMTA steel
Sv-04N3GSMTA steel
Steel Sv-04H19H11M3 (H-65)
Sv-04Cr19Ni (04Cr19N9) steel
Sv-04H20N10G2B (EP762)
Sv-06H14GMFBA steel
Steel Sv-08GN2SMD
Steel Sv-06Х21Н7БТ (EP500)
Sv-06Cr3G2SmFtu4 steel
Sv-06Kh8G2SMFtu4 steel
Steel Sv-07H22H13G5ST (ChS49)
Steel Sv-07Cr25H13 (H-71)
Steel Sv-07CGSN3MD
Steel Sv-07HN3MD
Sv-08 steel
Sv-08G1NMT steel
Sv-08G1S steel
Sv-08G2SM steel
Sv-08G2SNMT steel
Sv-08G2SNTYR steel
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | Св-08Х1ДЮ |
| Designation GOST Latin | Cb-08X1DJu |
| Transliteration | Sv-08H1DYu |
| The chemical elements | 08Cr1CuAl |
Description
Steel SV-08Х1ДЮ used: for the production of cold drawn wire with a diameter of 3−6 mm., designed for automatic and manual welding atmosferostojkostju steel type 10KHNDP.
Standards
| Name | Code | Standards |
|---|---|---|
| Welding and cutting of metals. Soldering, riveting | В05 | TU 14-1-1148-75 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Fe | Cu | Al |
|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-1148-75 | ≤0.1 | ≤0.035 | ≤0.035 | 0.3-0.6 | 0.9-1.2 | 0.12-0.35 | The rest | 0.2-0.35 | 0.02-0.12 |
Fe is the basis.
According to TU 14-1-1148-75 the nitrogen content is optional. Deviations in chemical composition are allowed in accordance with clause 3.5 of GOST 2246.
According to TU 14-1-1148-75 the nitrogen content is optional. Deviations in chemical composition are allowed in accordance with clause 3.5 of GOST 2246.
Technological properties
| Name | The value |
|---|---|
| Macrostructure and contamination | On the other 14-1-1148-75 the surface of the wire must be clean and smooth, without scale, rust, oil. Traces of soap grease (no graphite, sulphur and other impurities) are allowed. Allowed the presence of hydroxide on the surface. |
| Features of production | On the other 14-1-1148-75 wire supplied without annealing the cold-worked condition. |
