Steel 6Х7В7ФМ (ЭИ161)
9X1 steel
Steel 9X5VF
Steel 9G2F (EI972)
Steel 95Kh6M3F3ST (EK80)
Steel 90KhF (9Kh1F; 9KhF)
8XF steel
Steel 8Kh6NFT (85Kh6NFT)
Steel 8X4V2MFS2 (EP761)
Steel 8X3
Steel 8H1A
7CrNiM steel
7ХГ2ВМФ steel
7X3 steel
Steel 7X15VMFSN (ChS93)
7H2MFA steel
6HS steel (EI325)
6XVG steel
X12VMF steel
CGS steel
CVCGF steel
CVG steel
CV4F steel
X9VMF steel
Steel Х6ВФ (ЭИ808)
X12F1 steel
X12MF steel
6XV2S steel
X12 steel
Steel X
B2F steel
9KhFM steel
9XS steel
Steel 9KhVG
Steel 9X6F2ARSTG (EC15)
Steel 3X3M3F (EI76)
4XMF steel
4XMNFS steel
Steel 4Х5МФС (4Х5МФСА)
Steel 4Х5МФ1С (EP572)
Steel 4X5V2FS (EI958)
4X4VMFS steel (DI22)
4X3VMF steel (ZI2)
Steel 4Х2В5МФ (ЭИ959)
4KhMFS (40KhSMF) steel
3X2MNF steel
13X steel
Steel 12X1 (EP430)
Steel 11KhF (11Kh)
Steel 11Х4В2МФ3С2 (DI37)
Steel 05X13H6M2
Steel 05Х12Н6Д2МФСГТ (DI80)
Steel 6Х7В7ФМ (ЭИ161)
4HS steel
Steel 50X14MF (ЗИ128)
Steel 55CM5FA
Steel 55Kh7VSFM (55Kh7VSMF)
Steel 5Х2МНФ (DI32)
Steel 5Х3В3МФС (DI23)
5XANMF steel
5KhV2SF steel
Steel 5KhNV (5KhNVL)
5KhNVS steel
5CrNiM steel
6X3MFS steel (EP788)
6X4M2FS steel (DI55)
6X6V3MFS steel (EP569)
6X6M1F steel
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | 6Х7В7ФМ |
| Designation GOST Latin | 6X7B7FM |
| Transliteration | 6H7V7FM |
| The chemical elements | 6Cr7W7VMo |
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ЭИ161 |
| Designation GOST Latin | EI161 |
| Transliteration | EhI161 |
| The chemical elements | - |
Description
6Х7В7ФМ steel is used: for the production of long products (hot rolled and forged round bars and square cross-sections) with a diameter of 8−200 mm, intended for the manufacture of punches, dies, cutting tools and cold weapons.
Standards
| Name | Code | Standards |
|---|---|---|
| Sectional and shaped rolling | В32 | TU 14-1-2924-80 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | V | Mo | W |
|---|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-2924-80 | 0.55-0.65 | ≤0.03 | ≤0.03 | 0.3-0.6 | 6.5-7.5 | 0.3-0.6 | ≤0.3 | ≤0.3 | 0.25-0.35 | 6.5-7.5 |
According to TU 14-1-2924-80 the following deviations in chemical composition are allowed: by carbon ± 0.010%, by silicon ± 0.020%, by chroma ± 0.050%, by manganese ± 0.020%, by molybdenum ± 0.020%, by tungsten ± 0.050 %.
Technological properties
| Name | The value |
|---|---|
| Features of production | On the other 14-1-2924-80 steel supplied in the annealed condition with hardness not higher than HB 269 (indentation diameter not less than 3.7 mm). |
