By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel 08Х15Н25Т2МФР (ЭП674)

Steel 35KhSN3M1A (VKS-8) Steel 30Kh2GSN2VM (30Kh2GSN2M1; VL-1) Steel 30Kh2GSNVM (VL-1D) Steel 30Х2Н2СВМФА (VKS-3) Steel 30KhGSN2A (30KhGSNA) Steel 30KhGSN2MA (30KhGSNMA) Steel 30ХН3М1ФА (30ХН3М1Ф) Steel 30ХН3М2ФА (30ХН3М2Ф) Steel 32KhN8M1FK5A (VKS-6) Steel 34KhMA (34KhM) Steel 34KhN3MA (0KhN3M) Steel 35KhMA (35KhMAR) Steel 35KhN1M2FA Steel 35KHN3MFA (35KHN3MFAR) Steel 35ХС2Н3М1ФА (VKS-9) Steel 28ХНН3МФА (28ХН3МФ) Steel 36KHN3MFA (36KHN3MF) Steel 38Kh3SNMVFA (SP38) 38KhMFYUA steel 38KhN3MFA steel (38KhN3MF) 40GMFR steel Steel 40KhN2SVA (EI643) Steel 40KhN2SMA (EI643M) Steel 42Kh2GSNM (VKS-1) 43Kh3SNMVFA steel (SP43) Steel 45Г15Н9Х2ЮФ (EP769) 45Kh3NM2FA steel Steel АЦ28ХГН2АФБ Steel АЦ28ХГН3ФТ B2G steel X11MNAFB steel 20KhGSNM steel Steel 01N17K12M5T (EP845; VKS-240) Steel 02N18K9M5T (EP637A; VKS-210) Steel 03N18K8M5T (VKS-170; EK21) Steel 03N19K6M5TR (EP631) Steel 03Cr14H7V Steel 08Х15Н25Т2МФР (EP674) Steel 09Х16НМ2Д (EP887; VNS28) Steel 120G13 (EI256) 12Kh3GNMFBA steel Steel 15Х16Н3КАМФ2 (VNS-47; EK81) 15Kh2GMF steel 15Kh2NMFA steel Steel 16X16H3MAD (EP811; VSN21) Alloy 20ХГСН2МФА (DI107) Steel 28Kh3SNMVFA (SP28; EP326A) Steel 25Х12Н2В2М2Ф (EP311; VNS-6) Steel 25Х20Н9В2М (EP466) Steel 25Kh2GNTA Steel 25Х2ГНТРА Steel 25Х2Н4МФА Steel 25Kh2NMF (25Kh2NMFA) Steel 25KhGSNMA Steel 25KhN3MFA (25KhN3MFAR) Steel 25ХСНВФА (VP25) Steel 26ХН3М2ФА (26ХН3М2ФАA) Steel 26KhN3MF (26KhN3MFA) Steel 26KhN4MF (26KhN4MFA) Steel 27ХН3М2ФА (27ХН3М2Ф) Steel 27ХН3МФА (27ХН3МФ)

Designation

Name The value
Designation GOST Cyrillic 08Х15Н25Т2МФР
Designation GOST Latin 08X15H25T2MFP
Transliteration 08H15N25T2MFR
The chemical elements 08Cr15Н25Ti2MoVB
Name The value
Designation GOST Cyrillic ЭП674
Designation GOST Latin EP674
Transliteration EhP674
The chemical elements -

Description

08Х15Н25Т2МФР steel is used: for the manufacture of high-load working and fasteners turbines and other power equipment.

Note

Dispersion-hardened steel.
Analogue is the steel Grade 660 ASTM SA-638/SA-638M.

Standards

Name Code Standards
Metal forming. Forgings В03 TU 14-1-1530-75, TU 14-1-2902-80

Chemical composition

Standard C S P Mn Cr Si Ni Fe Al V B Ti Mo Ce Zr
TU 14-1-2902-80 ≤0.08 ≤0.015 ≤0.02 1.2-1.7 14-16 ≤0.7 24-26 The rest ≤0.3 0.2-0.4 ≤0.01 1.9-2.4 1.1-1.6 ≤0.01 ≤0.01
Fe is the basis.

Mechanical characteristics

Section, mm sT|s0,2, MPa σB, MPa d5, % y, % kJ/m2, кДж/м2 Brinell hardness number, MPa
Forgings on the other 14-1-2902-80. Quenching in oil with 970-990 °C (exposure 2 hours) + Aging at 710-730 °C (aging 16 h), air cooling
≥610 ≥880 ≥16 ≥20 ≥490 269-341

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
y The relative narrowing
kJ/m2 Toughness

Our consultant will save your time

+49 (170) 650 7006
E-mail:
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)