By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy V56

Designation

Name The value
Designation GOST Cyrillic В56
Designation GOST Latin B56
Transliteration V56
The chemical elements В56

Description

Alloy V56 is used: for the manufacture of casting in metal chill castings in the form of bars and maslot intended for the production of parts of friction, operating at ambient temperatures of 400−450° C, the rarefied atmosphere of 15−20 mm Hg. article, high loads and sliding velocities.

Note

Alloy wear-resistant and heat-resistant Nickel-based.

Standards

Name Code Standards
Castings from non-ferrous metals and alloys В84 TU 1-92-183-91

Chemical composition

Standard C S P Mn Cr Si Ni Fe Al B Ti W
TU 1-92-183-91 ≤0.05 ≤0.02 ≤0.025 ≤0.2 13.5-14.5 1.8-2.2 The rest 6.5-7.5 1.5-2 0.08-0.1 1.2-1.5 1.5-2
Ni is the basis.
According to TU 1-92-183-91 boron is introduced into the metal by calculation and chemical analysis is not determined.

Mechanical characteristics

σB, MPa d5, % kJ/m2, кДж/м2 Brinell hardness number, MPa
Cast rod stock (LPZ) and of piston ring blanks. Heating to 1070-1090 °With, exposure time 8 h, quenching and air cooling + Ageing at 690-710 °C for 16 h, air cooling
≥690 ≥12 ≥196 ≥240
≥690 ≥3 ≥196 ≥240

Description mechanical marks

Name Description
σB Limit short-term strength
d5 Elongation after rupture
kJ/m2 Toughness

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)