Alloy ЖС6К
Alloy ZhS3LS
Alloy KhN63MYUTBV (SZHL-800; EK112)
Alloy KhN58KTVYUMBL (ChS104)
Alloy KhN58KVTYUMBL (ChS70; CH25)
Alloy KhN57KVYUTMBRL (ChS88U)
Alloy KhN57KVYUTMBL (ChS88)
Alloy KhN57VMTYUBL (ChS91)
Alloy KhN54MVTYUL (ChS94)
Alloy CrN35Zh14AMTL
Alloy LK4
Alloy L114
Alloy ZhS6K
Alloy ZhS3DK
Alloy VZHL2M
Alloy VZHL15
Alloy B56
Alloy B3K
Alloy Biduloid
Alloy 45X26H33S2B2
Alloy 45Х26Н23С2Б2
Alloy 12XH28MDTL (EI629)
Alloy 06Х20Н10М3Д3С4Л (06Х20Н10М3Д3С4)
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ЖС6К |
| Designation GOST Latin | ZhC6K |
| Transliteration | GS6K |
| The chemical elements | FePb6 |
Description
Alloy ЖС6К used: for the production of cast bar billets (LPZ), intended for subsequent remelting and casting of gas turbine components.
Note
High-temperature casting Nickel-based alloy.
Standards
| Name | Code | Standards |
|---|---|---|
| Sectional and shaped rolling | В32 | OST 1 90126-85 |
| Non-ferrous metals, including rare metals, and their alloys | В51 | OST 1 90127-85 |
| Test methods. Packaging. Marking | В39 | OST 1 90181-75 |
| Bars | В55 | TU 1-809-1025-98 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | N | Al | B | Ti | Mo | Pb | Bi | W | Ce | O | Zr | Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OST 1 90127-85 | 0.13-0.2 | ≤0.015 | ≤0.015 | ≤0.4 | 9.5-12 | ≤0.4 | The rest | ≤2 | - | 5-6 | ≤0.02 | 2.5-3.2 | 3.5-4.8 | ≤0.001 | ≤0.0005 | 4.5-5.5 | ≤0.015 | - | - | 4-5.5 |
| OST 1 90126-85 | 0.13-0.2 | ≤0.015 | ≤0.015 | ≤0.4 | 9.5-12 | ≤0.4 | The rest | ≤2 | - | 5-6 | ≤0.02 | 2.5-3.2 | 3.5-4.5 | ≤0.001 | ≤0.0005 | 4.5-5.5 | ≤0.025 | - | ≤0.04 | 4-5.5 |
| TU 1-809-1025-98 | 0.12-0.17 | ≤0.01 | ≤0.015 | ≤0.3 | 9.5-12.5 | ≤0.3 | The rest | ≤1 | ≤0.005 | 5-6 | 0.005-0.01 | 2.5-3.2 | 3.5-4.5 | ≤0.001 | ≤0.0005 | 4.5-5.5 | ≤0.015 | ≤0.005 | ≤0.03 | 4.5-5.5 |
Ni is the basis.
According to TU 1-809-1025-98 the chemical composition is given for the alloy ZhS6K-VI.
According to OST 1 90126-85 the chemical composition is given for the alloy ZhS6K-VI. Boron, zirconium and cerium are introduced by calculation and chemical analysis are not determined. In the alloy, a deflection of boron plus 0.005% is allowed. In the alloy, the presence of non-deformable elements: vanadium, niobium and hafnium in the amount of not more than 0.20%, with vanadium not more than 0.10%.
According to OST 1 90127-85 the chemical composition is given for the alloy ZhS6K. Boron, cerium and zirconium are introduced into the metal by calculation and chemical analysis are not determined.
According to TU 1-809-1025-98 the chemical composition is given for the alloy ZhS6K-VI.
According to OST 1 90126-85 the chemical composition is given for the alloy ZhS6K-VI. Boron, zirconium and cerium are introduced by calculation and chemical analysis are not determined. In the alloy, a deflection of boron plus 0.005% is allowed. In the alloy, the presence of non-deformable elements: vanadium, niobium and hafnium in the amount of not more than 0.20%, with vanadium not more than 0.10%.
According to OST 1 90127-85 the chemical composition is given for the alloy ZhS6K. Boron, cerium and zirconium are introduced into the metal by calculation and chemical analysis are not determined.
Mechanical characteristics
| Section, mm | sT|s0,2, MPa | σB, MPa | d5, % | y, % | kJ/m2, кДж/м2 |
|---|---|---|---|---|---|
| Cast rod stock (LPZ) on the other 1-809-1025-98. Alloy ЖС6К-VI. Heating to 1200-1220 °C, exposure 4 hours, air cooling | |||||
| ≥784 | ≥882 | ≥2.5 | ≥3 | ≥147 | |
Description mechanical marks
| Name | Description |
|---|---|
| Section | Section |
| sT|s0,2 | Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
| σB | Limit short-term strength |
| d5 | Elongation after rupture |
| y | The relative narrowing |
| kJ/m2 | Toughness |
