Alloy 45Х26Н33С2Б2
Alloy ZhS3LS
Alloy KhN63MYUTBV (SZHL-800; EK112)
Alloy KhN58KTVYUMBL (ChS104)
Alloy KhN58KVTYUMBL (ChS70; CH25)
Alloy KhN57KVYUTMBRL (ChS88U)
Alloy KhN57KVYUTMBL (ChS88)
Alloy KhN57VMTYUBL (ChS91)
Alloy KhN54MVTYUL (ChS94)
Alloy CrN35Zh14AMTL
Alloy LK4
Alloy L114
Alloy ZhS6K
Alloy ZhS3DK
Alloy VZHL2M
Alloy VZHL15
Alloy B56
Alloy B3K
Alloy Biduloid
Alloy 45X26H33S2B2
Alloy 45Х26Н23С2Б2
Alloy 12XH28MDTL (EI629)
Alloy 06Х20Н10М3Д3С4Л (06Х20Н10М3Д3С4)
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | 45Х26Н33С2Б2 |
| Designation GOST Latin | 45X26H33C2B2 |
| Transliteration | 45H26N33S2B2 |
| The chemical elements | 45Cr26Ni33Pb2Be2 |
Description
Alloy 45Х26Н33С2Б2 used: for the production tsentrobezhnolityh tubes (casting) used in high temperature installations, plant engineering and shipbuilding and prednaznachen for further machining.
Note
High-temperature alloy.
Standards
| Name | Code | Standards |
|---|---|---|
| Pipes steel and connecting parts to them | В62 | TU 5.961-11512-93 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | Cu | Al | B | Ti | Mo | Nb | W | Zr | Mg | Y |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TU 5.961-11512-93 | 0.4-0.45 | ≤0.015 | ≤0.015 | 0.8-1.1 | 25-27 | 1.6-1.8 | 32-34 | The rest | ≤0.2 | ≤0.2 | ≤0.005 | 0.2-0.4 | 0.2-0.3 | 1.6-1.8 | 0.6-0.8 | ≤0.1 | ≤0.1 | ≤0.1 |
Fe is the basis.
According to TU 5.961-11512-93, the residual content of elements and the maximum deviations in chemical composition must comply with GOST 5632. Zirconium, yttrium, magnesium and boron are introduced by calculation and chemical analysis is not determined.
According to TU 5.961-11512-93, the residual content of elements and the maximum deviations in chemical composition must comply with GOST 5632. Zirconium, yttrium, magnesium and boron are introduced by calculation and chemical analysis is not determined.
Mechanical characteristics
| Section, mm | sT|s0,2, MPa | σB, MPa | d5, % | y, % |
|---|---|---|---|---|
| Pipe tsentrobezhnolityh in the delivery condition on the other 5.961-11512-93 (without thermal and mechanical treatment, longitudinal samples) | ||||
| ≥245 | ≥441 | ≥10 | ≥10 | |
Description mechanical marks
| Name | Description |
|---|---|
| Section | Section |
| sT|s0,2 | Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
| σB | Limit short-term strength |
| d5 | Elongation after rupture |
| y | The relative narrowing |
