Brass LO62-1
Brass LO70-1
Brass LMZA57-3-1
Brass LMzAJKS70-7-5-2-2-1
Brass LMZh57-1,5-0,75
Brass LMtsKA58-2-1-1
Brass LMtsKNS58-3-1,5-1,5-1
Brass LMtsKNSA58-3-1,5-1,5-1
Brass LMtsSKa58-2-2-1-1
Brass LMsh68-0,05
Brass LN65-5
Brass LNKMts49-10-0,3-0,2
Brass LNKoMts49-9-0,2-0,2
Brass ЛНМц60-9-5
Brass LO60-1
Brass LO62-1
Brass LKS65-1,5-3
Brass LO90-1
Brass LOK59-1-0.3
Brass LOMNA49-0,5-10-0,4-0,4
Brass Lomsh70-1-0.04
Brass Lomsh70-1-0.05
Brass LS58-2
Brass LS58-3
Brass LS59-1
Brass LS59-1B
Brass LS59-2
Brass LS60-1
Brass LS63-3
Brass LS64-2
Brass LS74-3
Brass LA85-0.5
Brass L59
Brass L60
Brass L63
Brass L66
Brass L68
Brass L70
Brass L72
Brass L75mk
Brass L80
Brass L85
Brass L90
Brass L96
Brass LA77-2
Brass LA77-2u
Brass LMZ58-2
Brass LAJ60-1-1 (LAJ60-1-1L)
Brass LAZHMTS52-2-1-1,5-1
Brass LAMsh77-2-0,04
Brass LAMSh77-2-0,05
Brass LAN59-3-2
Brass LANKMZ 75-2-2,5-0,5-0,5 (alloy 156)
Brass LAF94-0,5-0,15
Brass LZMc59-1-1
Brass LZhS58-1-1
Brass LC62-0.5
Brass LK75B
Brass LCAN80-1-1,9-5,8
Brass ЛКАНМЦ75-2-2,5-0,5-0,5
Brass LCBO62-0,2-0,04-0,5
Designation
Name |
The value |
Designation GOST Cyrillic |
ЛО62-1 |
Designation GOST Latin |
LO62-1 |
Transliteration |
LO62-1 |
The chemical elements |
ЛSn62-1 |
Description
Brass LO62−1 is used: for the manufacture of semi-finished products (sheets, strips, plates, bars, tubes); tube sheets; various parts of the instrument; condensers and heat exchangers; products of medium strength and good corrosion resistance.
Note
Complex alloyed brass.
Standards
Name |
Code |
Standards |
Tapes |
В54 |
GOST 15527-2004, GOST 2208-2007 |
Non-ferrous metals, including rare metals, and their alloys |
В51 |
GOST 28873-90 |
Bars |
В55 |
GOST 6688-91, GOST 2060-2006 |
Sheets and stripes |
В53 |
GOST 931-90 |
Pipes from non-ferrous metals and alloys |
В64 |
TU 48-0810-87-87 |
Chemical composition
Standard |
P |
Fe |
Cu |
Zn |
Sn |
Sb |
Pb |
Bi |
GOST 2208-2007 |
≤0.01 |
≤0.1 |
61-63 |
The rest |
0.7-1.1 |
≤0.005 |
≤0.1 |
≤0.002 |
Cu is the basis.
According to GOST 15527-2004, GOST 2060-2006, GOST 2208-2007, the sum of other elements should be ≤ 0.30%. In brass, the mass fraction of nickel is allowed up to 0.50% due to the mass fraction of copper, which is not taken into account in the sum of other impurities.
Mechanical characteristics
Section, mm |
σB, MPa |
d10 |
Brinell hardness number, MPa |
Sheets hot rolled as supplied by GOST 931-90, sheets and strips GOST 2208-2007 (samples) |
- |
340-440 |
≥20 |
- |
Sheets and strip, cold-rolled in the state of delivery according to GOST 931-90, sheets and strips GOST 2208-2007 (samples) |
- |
≥390 |
≥5 |
≥145 |
Rods are supplied according to GOST 2060-2006 (longitudinal samples) |
10-180 |
≥360 |
≥20 |
≥80 |
3-50 |
≥390 |
≥15 |
≥100 |
Extruded bars of rectangular cross section as delivered by GOST 6688-91 (samples prodolny) |
- |
≥340 |
≥25 |
- |
Description mechanical marks
Name |
Description |
Section |
Section |
σB |
Limit short-term strength |
d10 |
Elongation after rupture |
Physical characteristics
Temperature |
Е, ГПа |
r, кг/м3 |
l, Вт/(м · °С) |
R, НОм · м |
20 |
105 |
8500 |
1089 |
78 |
A description of the physical symbols
Name |
Description |
Е |
The normal elasticity modulus |
l |
Coefficient of thermal conductivity |