Brass Lzhmc59-1-1
Brass LO70-1
Brass LMZA57-3-1
Brass LMzAJKS70-7-5-2-2-1
Brass LMZh57-1,5-0,75
Brass LMtsKA58-2-1-1
Brass LMtsKNS58-3-1,5-1,5-1
Brass LMtsKNSA58-3-1,5-1,5-1
Brass LMtsSKa58-2-2-1-1
Brass LMsh68-0,05
Brass LN65-5
Brass LNKMts49-10-0,3-0,2
Brass LNKoMts49-9-0,2-0,2
Brass ЛНМц60-9-5
Brass LO60-1
Brass LO62-1
Brass LKS65-1,5-3
Brass LO90-1
Brass LOK59-1-0.3
Brass LOMNA49-0,5-10-0,4-0,4
Brass Lomsh70-1-0.04
Brass Lomsh70-1-0.05
Brass LS58-2
Brass LS58-3
Brass LS59-1
Brass LS59-1B
Brass LS59-2
Brass LS60-1
Brass LS63-3
Brass LS64-2
Brass LS74-3
Brass LA85-0.5
Brass L59
Brass L60
Brass L63
Brass L66
Brass L68
Brass L70
Brass L72
Brass L75mk
Brass L80
Brass L85
Brass L90
Brass L96
Brass LA77-2
Brass LA77-2u
Brass LMZ58-2
Brass LAJ60-1-1 (LAJ60-1-1L)
Brass LAZHMTS52-2-1-1,5-1
Brass LAMsh77-2-0,04
Brass LAMSh77-2-0,05
Brass LAN59-3-2
Brass LANKMZ 75-2-2,5-0,5-0,5 (alloy 156)
Brass LAF94-0,5-0,15
Brass LZMc59-1-1
Brass LZhS58-1-1
Brass LC62-0.5
Brass LK75B
Brass LCAN80-1-1,9-5,8
Brass ЛКАНМЦ75-2-2,5-0,5-0,5
Brass LCBO62-0,2-0,04-0,5
Designation
| Name |
The value |
| Designation GOST Cyrillic |
ЛЖМц59-1-1 |
| Designation GOST Latin |
LZhMts59-1-1 |
| Transliteration |
LGMts59-1-1 |
| The chemical elements |
ЛFeMn59-1-1 |
Description
Brass Lzhmc59−1-1 is used: for the manufacture of semi-finished products (plates, strips, pipes, rods, wire, profiles); parts ships, aircraft; the manufacture of round welding wire and welding rods round drawn and extruded, designed for gas welding brass welding on carbon steel.
Note
Complex alloyed brass.
Standards
| Name |
Code |
Standards |
| Tapes |
В54 |
GOST 15527-2004, GOST 2208-2007 |
| Welding and cutting of metals. Soldering, riveting |
В05 |
GOST 16130-90 |
| Bars |
В55 |
GOST 2060-2006, TU 48-0810-116-82, TU 48-0810-85-87 |
| Non-ferrous metals, including rare metals, and their alloys |
В51 |
GOST 28873-90 |
| Pipes from non-ferrous metals and alloys |
В64 |
GOST 494-90, GOST 494-2014, OOP 5.9243-87, TU 48-0810-196-90 |
| Sectional and shaped rolling |
В52 |
TU 48-0810-89-86, TU 48-0810-101-82 |
| Sheets and stripes |
В53 |
TU 48-21-520-86 |
Chemical composition
| Standard |
P |
Mn |
Fe |
Cu |
Al |
Zn |
Sn |
Sb |
Pb |
Bi |
| GOST 15527-2004 |
≤0.01 |
0.5-0.8 |
0.6-1.2 |
57-60 |
0.1-0.4 |
The rest |
0.3-0.7 |
≤0.01 |
≤0.2 |
≤0.003 |
Cu is the basis.
According to GOST 15527-2004, GOST 2060-2006, GOST 2208-2007, the sum of other elements should be ≤ 0.30%. In brass, the mass fraction of nickel is allowed up to 0.50% due to the mass fraction of copper, which is not taken into account in the sum of other impurities.
Mechanical characteristics
| Section, mm |
σB, MPa |
d10 |
Brinell hardness number, MPa |
| Strips and sheets hot rolled as supplied by GOST 2208-2007 (samples) |
| - |
≥390 |
≥20 |
- |
| Rods are supplied according to GOST 2060-2006 (longitudinal samples) |
| 10-180 |
≥430 |
≥28 |
≥80 |
| 13-50 |
≥440 |
≥17 |
≥130 |
| 3-12 |
≥490 |
≥15 |
≥130 |
| Tubes extruded in the state of delivery according to GOST 494-90 (samples) |
| - |
≥430 |
≥28 |
- |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| σB |
Limit short-term strength |
| d10 |
Elongation after rupture |
Physical characteristics
| Temperature |
Е, ГПа |
r, кг/м3 |
l, Вт/(м · °С) |
R, НОм · м |
| 20 |
106 |
8500 |
1004 |
93 |
A description of the physical symbols
| Name |
Description |
| Е |
The normal elasticity modulus |
| l |
Coefficient of thermal conductivity |
