By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy KHN60JU (ЭИ559А)

Alloy 05KhN46MVBh (DI65) Alloy KhN30VMT (EP437; VZH102) Alloy KhN30TDU (EP655; VNS12) Alloy KhN38VT (EI703) Alloy KhN45TU (EK101; VKS-46) Alloy KhN45Yu (EP747) Alloy KhN50MVKTYR (EP99) Alloy CrN60VT (EI868; VZh98) Alloy KhN60Yu (EI559A) Alloy KhN70Yu (EI652) Alloy KhN75MBTU (EI602) Alloy KhN77TU (EI437A) Alloy CrN78T (EI435) Alloy EC79

Designation

Name The value
Designation GOST Cyrillic ХН60Ю
Designation GOST Latin XH60Ju
Transliteration HN60Yu
The chemical elements CrNi60Al
Name The value
Designation GOST Cyrillic ЭИ559А
Designation GOST Latin EI559A
Transliteration EhI559A
The chemical elements -

Description

Alloy KHN60JU used: for the manufacture of sheet metal components for turbines operating at moderate voltages, parts, gas pipeline systems, equipment with limited service life at 1100 °C and short service life at 1250 °C.

Note

Alloy, heat-resistant and heat-resistant Nickel-based. The recommended maximum operating temperature for a limited time — 1200 °C. the Temperature of beginning of intensive scaling in air — more than 1250 °C.

Standards

Name Code Standards
Classification, nomenclature and general norms В30 GOST 5632-72
Bulls. Blanks. Slabs В31 OST 3-1686-90
Sectional and shaped rolling В32 TU 14-11-245-88

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu Al Ti Mo Ce Ba
GOST 5632-72 ≤0.1 ≤0.02 ≤0.02 ≤0.3 15-18 ≤0.8 55-58 The rest ≤0.3 2.6-3.5 ≤0.2 ≤0.3 ≤0.03 ≤0.1
Ni is the basis.

Mechanical characteristics

Section, mm sT|s0,2, MPa σB, MPa y, %
Without heat treatment
≥4 360 720 50

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
y The relative narrowing

Physical characteristics

Temperature Е, ГПа r, кг/м3 l, Вт/(м · °С) a, 10-6 1/°С
20 210 7900 - -
800 169 - 402 1518
100 - - 105 1228
200 - - 13 1308
300 - - 159 1342
400 - - 196 142
500 - - 24 1422
600 - - 293 1459
700 - - 345 1511
900 - - 474 1588

A description of the physical symbols

Name Description
Е The normal elasticity modulus
r Density
l Coefficient of thermal conductivity

Technological properties

Name The value
Weldability without restrictions

Our consultant will save your time

+49(1523) 72 15 100
E-mail:
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
Nickel tape, Brass foil, 10X17H13M2T circle, pipe 06hn28mdt, pt7m pipe