Alloy ХН33БС
Alloy KhN23MTYR (EP260)
Alloy KhN43MGB (EP941)
Alloy KhN43BMTU (EP915)
Alloy KhN38VB (EI703B)
Alloy KhN35MTU (EP105)
Alloy KhN35KVT (EI612K)
Alloy CrN35VTU (EI787)
Alloy CrN35VT (EI612)
Alloy CrN35VB (EP912)
Alloy KhN33KVY (VZH145; EK102)
Alloy KhN33BS
Alloy HC30NVMT (EP720)
Alloy Kh20N32T (KhN32T; EP670)
Alloy Kh18K60V14N11 (EP131)
Alloy 20X25N25TU
Alloy 20X25H20S
Alloy 16KhNKGMB (EP899)
Alloy 15Х25Н40М2ВТ
Alloy 10X20H32TU
Alloy 05X20H32T
Designation
Name | The value |
---|---|
Designation GOST Cyrillic | ХН33БС |
Designation GOST Latin | XH33BC |
Transliteration | HN33BS |
The chemical elements | CrNi33BePb |
Description
Alloy ХН33БС applied: exploitation in the form of the reaction tubes in installations for the production of methanol and ammonia and operating at temperatures up to +960 °C and an operating pressure of 3.92 N/mm2.
Note
High-temperature chromium-Nickel alloy based on iron.
Standards
Name | Code | Standards |
---|---|---|
Pipes steel and connecting parts to them | В62 | TU 14-1-5581-2009 |
Chemical composition
Standard | C | S | P | Mn | Cr | Si | Ni | Fe | Cu | As | Al | V | Ti | Mo | Zn | Sn | Pb | Nb | W | Ce | Co |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TU 14-1-5581-2009 | 0.3-0.4 | ≤0.02 | ≤0.025 | 0.8-1.45 | 20-23 | 0.45-0.95 | 30-33 | The rest | ≤0.2 | ≤0.01 | 0.0005-0.1 | 0.0005-0.15 | 0.0005-0.15 | ≤0.25 | ≤0.01 | ≤0.01 | ≤0.01 | 1-1.7 | 0.05-0.2 | 0.07-0.11 | ≤0.1 |
Fe is the basis.
To TU 14-1-5581-2009 Simultaneously two obligatory additional conditions must be fulfilled:
Nickel equivalent =% Ni + 32% C + 0.6% Mn +% Cu = 40.08 - 46, 870%;
Equivalent chromium =% Cr + 3% Ti +% V +% Mo + 1.6% Si + 0.6% Nb = 21.322 - 26.39%.
The mass fraction of cerium is not determined, it is ensured by the technology of production of the alloy adopted at the plant.
To TU 14-1-5581-2009 Simultaneously two obligatory additional conditions must be fulfilled:
Nickel equivalent =% Ni + 32% C + 0.6% Mn +% Cu = 40.08 - 46, 870%;
Equivalent chromium =% Cr + 3% Ti +% V +% Mo + 1.6% Si + 0.6% Nb = 21.322 - 26.39%.
The mass fraction of cerium is not determined, it is ensured by the technology of production of the alloy adopted at the plant.
Mechanical characteristics
Section, mm | sT|s0,2, MPa | σB, MPa | d5, % |
---|---|---|---|
Pipe tsentrobezhnolityh (DH=100-300 mm, wall thickness of 10-25 mm) as supplied on THAT 14-1-5581-2009 (longitudinal samples) | |||
≥245 | ≥490 | ≥8 |
Description mechanical marks
Name | Description |
---|---|
Section | Section |
sT|s0,2 | Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
σB | Limit short-term strength |
d5 | Elongation after rupture |