By visiting this site, you accept the use of cookies. More about our cookie policy.

Machining and application of brass pipe


Production is normalized by the following GOST: 11 383-75, 2624-77, 617-2006, 24 301-93, 494-90, 21 646-2003, and GOST R 51573-2000. Production is carried out of a wide variety of brass grades, the chemical composition of which corresponds to the norms of GOST 24 301-93. The marking shows the category of the products, technical conditions of production, method of manufacture, delivery condition and some additional characteristics. Fabrication accuracy in length and thickness may be normal, elevated or high.


By manufacturing method, brass pipe is subdivided into: cold-rolled, drawn (D); hot-formed, pressed (D). According to technical characteristics on: general purpose, produced in accordance with GOST 494-90, as well as thin-walled drawn, produced in accordance with GOST 11 383-75. According to material grade: soft (М), high ductility (L), semi-hard (S), semi-hard with high ductility (I) and hard pipe after super-low temperature annealing (T). In terms of manufacturing precision, there is high precision pipe (H), elevated precision pipe (P), and normal precision pipe (N). In terms of curvature, there is increased precision pipe (T) and high precision pipe (K). Pipe of increased plasticity is designated (L). Antimagnetic brass pipe is designated (A), pressed (G), welded © ©. The shape of the cross-section of brass pipes is only round (CR).


Among the main advantages of brass pipes are that they have the highest corrosion resistance, as well as excellent ductility. They are easily amenable to any kind of processing, soldering, welding. This material is resistant to wear and has a low specific weight. Brass pipe is easy to install, aesthetically attractive, belong to the class of prestigious materials.


Mechanical engineering, power engineering, instrumentation, housing and communal services, construction. Installation of a variety of engineering systems, sectional radiators, water pipes, furniture fittings, gauge springs.

Tube diameter, mm Measurement unit Cost
Soft brass pipes l 63, as well as semi-hard
4-19 kg As agreed
22-50 kg --- "---
Soft brass tubes l 68, as well as semi-solid
12-160 kg --- "---

The most commonly used grades are L68, L63.

Mark Fe Si Cu PB Zn Sb Vi Sn Mn AL Impurities
Л 59 39.48-43 0.01 57-60 0.5 39.1-43 0.01 0.003 0.2 ≤ 0.9
Л 60 0.2 0.01 59-62 0.3 37-41 0.01 0.003 ≤ 1
Ls 59-1 0.5 0.02 57-60 0.8-1.9 37.35-42.2 0.01 0.003 ≤ 0.75
Л 68 0.1 0.01 67 0.03 27.8-31 0.002 0.002 ≤ 0.2
Л 70 0.07 0.005 69-72 0.03 27.8-31 0.002 0.002 ≤ 0.2
Л 96 0.1 0.1 95-97 0.03 2.8-5 0.005 0.002 ≤ 0.2
LWMz 59-1-1 0.6-1.2 0.01 57-60 0.2 37.05-41.5 0.01 0.003 0.3-0.7 0.5-0.8 0.1-0.4 ≤ 0.25


Are you interested in the machining and application of brass pipe? The processing and application of brass pipe on the site of the supplier Auremo is most fully covered. We offer to buy brass pipe from specialized warehouses of the supplier "Auremo" with delivery in any city. Full compliance with GOST and international quality standards. Wholesale customers price - favorable. Buy brass pipe today.

Buy a bargain price.

At the warehouse of the supplier "Auremo" is the widest selection of products. Always available brass pipe, the price - due to the technological features of production without the inclusion of additional costs. Buy brass pipe today, the price - the best from the supplier. We are waiting for your orders. We have the best price-quality ratio for the whole range of products. In touch with experienced managers - will promptly help you buy brass pipe in bulk or in installments. Regular customers can buy brass pipe with a discount discount, the price - the best in this segment of rolled products. Supplier "Auremo" is a recognized expert in the market of non-ferrous metals. Thanks to the representative offices in Eastern Europe, we have the possibility of prompt interaction with trade partners.

Our consultant will save your time

+49 (170) 650 7006


Special offers and discounts. :)