By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel 55KHGR

Designation

Name The value
Designation GOST Cyrillic 55ХГР
Designation GOST Latin 55XGP
Transliteration 55HGR
The chemical elements 55CrMnB

Description

55KHGR steel is used: for the manufacture of spring steel strip thickness 3,0−24,0 mm.

Note

Steel spring alloy quality.

Standards

Name Code Standards
Sheets and stripes В23 GOST 103-2006
Sectional and shaped rolling В22 GOST 1133-71, GOST 2590-2006, GOST 2591-2006, GOST 2879-2006
Steel wire medium- and high-carbon В72 GOST 26366-84
Sectional and shaped rolling В32 GOST 7417-75, GOST 7419-90, GOST 8559-75, GOST 8560-78, GOST 14955-77, GOST 14959-79, TU 14-1-2118-77, TU 14-11-245-88, TU 14-136-367-2008

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu B
GOST 14959-79 0.52-0.6 ≤0.035 ≤0.035 0.9-1.2 0.9-1.2 0.17-0.37 ≤0.25 The rest ≤0.2 0.001-0.003
Fe is the basis.

Mechanical characteristics

Section, mm t отпуска, °C sT|s0,2, MPa σB, MPa d5, % y, % kJ/m2, кДж/м2 HRC
Rolled steel. Steel categories: 3, 3A, 3B, 3C, 3D, 4, 4A, 4B. Quenching in oil from 850 °C + vacation at 470 °C
- ≥1175 ≥1270 ≥7 ≥35 - -
Rolled steel. Hardened in oil from 830 °C to + Vacation
- 350 ≥1760 ≥1910 ≥7 ≥38 ≥500 ≥51
- 400 ≥1620 ≥1810 ≥7 ≥40 ≥530 ≥49
- 450 ≥1420 ≥1570 ≥9 ≥41 ≥579 ≥45
- 500 ≥1180 ≥1370 ≥11 ≥47 ≥696 ≥41
- 550 ≥1080 ≥1180 ≥12 ≥51 ≥834 ≥37

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
y The relative narrowing
kJ/m2 Toughness
HRC Rockwell hardness (indenter diamond spheroconical)

Our consultant will save your time

+49 (170) 650 7006
E-mail:
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)