Alloy SV-03Х20Н45Г6М6Б (ЭП953)
Alloy PANCH-11
Alloy Sv-03H20N45G6M6B (EP953)
Alloy Св-08Х20Н57М8В8Т3Р (EP533)
Alloy Sv-08X25N25M3 (EP622)
Alloy Sv-08Х25Н40М7 (EP673)
Alloy Sv-08Х25Н60М10 (EP606)
Alloy Sv-36NGMT (EP803)
Alloy SvHN60MVU (ChS40)
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | Св-03Х20Н45Г6М6Б |
| Designation GOST Latin | Cb-03X20H45G6M6B |
| Transliteration | Sv-03H20N45G6M6B |
| The chemical elements | 03Cr20Ni45Ge6Cu6Be |
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ЭП953 |
| Designation GOST Latin | EP953 |
| Transliteration | EhP953 |
| The chemical elements | - |
Description
Alloy SV-03Х20Н45Г6М6Б used: for the production of welding wire with a nominal diameter of 1.2 to 4.0 mm designed for welding of corrosion resistant alloy grade ХН46Б (ЭП350).
Note
Alloy for corrosion-resistant iron-Nickel basis.
Standards
| Name | Code | Standards |
|---|---|---|
| Welding and cutting of metals. Soldering, riveting | В05 | TU 14-1-4973-91 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | Mo | Nb |
|---|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-4973-91 | ≤0.03 | ≤0.015 | ≤0.015 | 6-7.5 | 19-22 | ≤0.3 | 44-48 | The rest | 5.5-7 | 1.5-1.8 |
Ni is the basis.
According to TU 14-1-4973-91 the chemical composition is presented for an alloy of the brand Sv-03X20N45G6M6B-VI (EP953-VI). An increase in the content of niobium plus 0.10% is permissible. The content of nitrogen in the alloy is not regulated, it is determined and entered in the certificate.
According to TU 14-1-4973-91 the chemical composition is presented for an alloy of the brand Sv-03X20N45G6M6B-VI (EP953-VI). An increase in the content of niobium plus 0.10% is permissible. The content of nitrogen in the alloy is not regulated, it is determined and entered in the certificate.
Technological properties
| Name | The value |
|---|---|
| Features of production | Wire on the other 14-1-4973-91 diameter up to 2.0 mm inclusively, supplied in cold-worked condition, and a diameter greater than 2.0 mm in the heat-treated, without determining mechanical properties. |
