Alloy PUNCH-11
Alloy PANCH-11
Alloy Sv-03H20N45G6M6B (EP953)
Alloy Св-08Х20Н57М8В8Т3Р (EP533)
Alloy Sv-08X25N25M3 (EP622)
Alloy Sv-08Х25Н40М7 (EP673)
Alloy Sv-08Х25Н60М10 (EP606)
Alloy Sv-36NGMT (EP803)
Alloy SvHN60MVU (ChS40)
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ПАНЧ-11 |
| Designation GOST Latin | PAHCh-11 |
| Transliteration | PANCh-11 |
| The chemical elements | ПAlNiЧ-11 |
Description
Alloy PANCH-11 is used: for the production of welding wire with a diameter of 1.2 mm, intended for welding and surfacing.
Note
Low alloy Nickel alloy.
Standards
| Name | Code | Standards |
|---|---|---|
| Non-ferrous metals, including rare metals, and their alloys | В51 | GOST 28873-90 |
| Welding and cutting of metals. Soldering, riveting | В05 | TU 48-21-593-85 |
Chemical composition
| Standard | C | Mn | Si | Ni | Fe | Cu |
|---|---|---|---|---|---|---|
| TU 48-21-593-85 | ≤0.3 | 5-6 | ≤0.3 | The rest | ≤2 | 2.3-3 |
Ni is the basis.
According to TU 48-21-593-85 the chemical composition is given for the alloy PANCH-11 vacuum melt. The normalized sum of rare-earth elements (REE) in the alloy should be in the range of 0.20-0.40%. The sum of the remaining impurities (not indicated in the table) should not be more than 0.30%.
According to TU 48-21-593-85 the chemical composition is given for the alloy PANCH-11 vacuum melt. The normalized sum of rare-earth elements (REE) in the alloy should be in the range of 0.20-0.40%. The sum of the remaining impurities (not indicated in the table) should not be more than 0.30%.
Technological properties
| Name | The value |
|---|---|
| Features of production | Wire on the other 48-21-593-85 comes in hard (unannealed) condition. By agreement with consumer it is permitted to produce wire diameters: 1,40; 1,60; 1,80; 2,00; 2,5; 3,00; 3,50; 4,00. |
