Bronze Brhnt
Bronze БрХ0,6Цр0,05 (БрХЦр0,6-0,05)
Bronze BrN10,5A0,5 (BrNA10,5-0,5)
Bronze БрН2,5Х0,7К0,6 (БрНХК2,5-0,7-0,6)
Bronze БрН5Мц2Т0,1 (БрНМцТ5-2-0,1)
BrNTsr bronze
Bronze BrSr0,1
Bronze БрТ5Х0,5 (БрТХ5-0,5)
Bronze БрХ0,2Нб0,1 (Alloy 204А; БрХНб0,2-0,1)
Bronze БрХ0,3Цр0,09 (БрХЦр0,3-0,09)
Bronze БрХ0,4Ко0,4Кр0,2Мг0,04 (Alloy №50)
Bronze БрХ0,4Нб0,25 (Alloy 204; БрХНб0,4-0,25)
Bronze БрХ0,5В0,2Цр0,2 (ХВЦр0,5-0,2-0,2)
Bronze БрХ0,6Т0,5 (БрХТ0,6-0,5)
Bronze BrMc5
BrCr0.7 bronze
Bronze БрХ0,8
Bronze BrX1
Bronze BrC1Cr
Bronze BrChNb
Bronze BrCNT
Bronze BrCrK
Bronze BrCrTV
Bronze BrCr0,2
Bronze BrCr0,3
Bronze BrCr0,4
Bronze BrCr0.7
Bronze БрА9Ж4Н4Мц1 (БрАЖНМц9-4-4-1)
Bronze BrB2
Bronze БрАЖ1,5 (БрАЖ10-1,5)
Bronze БрААЖ3Мц1,5 (БрАЖМц10-3-1,5)
Bronze БрААЖ10Ж4Н4 (БрАЖН10-4-4)
Bronze БрАА10Мц2 (БрАМц10-2)
Bronze BrA5
Bronze БрА6Мг1 (БрАМг6-1)
Bronze BrA7
Bronze БрА8,5Ж4Н5Мц1,5 (БрАЖНМц8,5-4-5-1,5)
Bronze БрАА9Ж4 (БрАЖ9-4)
Bronze БрА9Мц2 (БрАМц9-2)
Bronze БрБ1,7НТ (БрБНТ1,7)
Bronze БрБ1,9НТ (БрБНТ1,9)
Bronze БрБ1,9НТМг (БрБНТ1,9Мг)
Bronze BrN1,5Kr0,5 (BrNKr1,5-0,5)
Bronze BrB2,5
Bronze БрК0,4Х0,6Кo1,6 (БрКХКo0,4-0,6-1,6)
Bronze BrK1H3 (BrKN1-3)
Bronze БрК3Мц1 (БрКМц3-1)
Bronze BrKd0,5X0,15 (BrKdX0,5-0,15)
Bronze BrKd1
BrKo3Mts10 (BrKoMts3-10) bronze
Bronze BrMg0.03Cr0.035 (BrMgCr0.03-0.035)
Bronze BrMg0,3
Bronze BrMg0,5
Bronze BrMg0,8
Bronze BrMc12A8Zh3N2 (BrMcAzHN12-8-3-2)
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | БрХНТ |
| Designation GOST Latin | BpXHT |
| Transliteration | BrHNT |
| The chemical elements | BaCrNiTe |
Description
Bronze Brhnt used: for the manufacture of cold-deformed (drawn) round welding wire diameter 1,2; 1,4; 1,6; 1,8; 2,0; 2,5; 3,0; 3,5; 4,0 mm; cast electrodes for seam, butt and spot welding; circular welding wire and welding rods round drawn and extruded with a diameter of from 1.2 to 4.0 mm, are intended for manual organomegaly welding of bronzes.
Note
Low-alloy bronze.
Standards
| Name | Code | Standards |
|---|---|---|
| Welding and cutting of metals. Soldering, riveting | В05 | GOST 16130-90 |
| Non-ferrous metals, including rare metals, and their alloys | В51 | GOST 28873-90 |
Chemical composition
| Standard | P | Cr | Si | Ni | Fe | Cu | Ti | Zn | Pb | Mg |
|---|---|---|---|---|---|---|---|---|---|---|
| GOST 16130-90 | ≤0.005 | 0.15-0.35 | ≤0.03 | 0.5-0.8 | ≤0.06 | The rest | 0.05-0.15 | ≤0.025 | ≤0.005 | ≤0.002 |
Cu is the basis.
According to GOST 16130-90 the chemical composition is given for welding wires and bars made of bronze of BrHNT grade. The total amount of impurities should be ≤0,20%.
According to GOST 16130-90 the chemical composition is given for welding wires and bars made of bronze of BrHNT grade. The total amount of impurities should be ≤0,20%.
