By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel 12Х2МФА (48ТС-2)

Steel 15Kh5M (X5M) 30Cr3MA steel 30Kh3VA steel Steel 25X5M Steel 25Kh3MFA-A Steel 25Kh3MFA (48TS-4) Steel 25Kh2MFA (48TS-1) Steel 25Kh2M1F (EI723) Steel 25Х1МФ (ЭИ10) Steel 20Х3МВФ (ЭИ415) Steel 20Х1М1Ф1ТР (EP182) Steel 18Kh3MV (EI578) Steel 18Kh2MFA-A Steel 18Kh2MFA (48TS-3) 15CrM Steel Steel 15X5VF (X5VF) Steel 15X5 (X5) Steel 15Kh2MFA-A Steel 15Kh2MFA (48TS-3-40) Steel 13X9M (X9M) Steel 13Х3Н3М2ВФБ (VKS-10) 12XM steel Steel 12Kh8VF (1Kh8VF) Steel 12X8 (1X8) Steel 12Kh2MFA-A Steel 12Х2МФА (48ТС-2) Steel 12Kh1MF (12KhMF; 12KhMFA) 12MX steel Steel 08Х16Н9М2 To access the entire list

Designation

Name The value
Designation GOST Cyrillic 12Х2МФА
Designation GOST Latin 12X2MFA
Transliteration 12H2MFA
The chemical elements 12Cr2MoV
Name The value
Designation GOST Cyrillic 48ТС-2
Designation GOST Latin 48TC-2
Transliteration 48TS-2
The chemical elements 48TiС-2

Description

12Х2МФА steel is used: for the production of workpieces in the form of forgings, sheets, sheet blanks, the sheet of stamped blanks, Cavanaugh-rolled billets (slabs), used for products of machinery and vessels, working under pressure and within the jurisdiction of the Gosatomenergonadzor.

Standards

Name Code Standards
Bulls. Blanks. Slabs В31 TU 108.131-86

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu As V Mo Co
TU 108.131-86 0.11-0.16 ≤0.02 ≤0.02 0.3-0.6 2-2.5 0.17-0.37 ≤0.4 The rest ≤0.3 ≤0.04 0.25-0.35 0.6-0.8 ≤0.025
Fe is the basis.
According to TU 108.131-86 the chemical composition is given for steel grade 12X2MFA. In the chemical composition, deviations are allowed: carbon ± 0.010%, manganese, silicon, and vanadium ± 0.050% each, chromium ± 0.10%.

Mechanical characteristics

Section, mm sT|s0,2, MPa σB, MPa d5, % y, % kJ/m2, кДж/м2 Brinell hardness number, MPa
Billet heat-treated in the delivery condition on the other 108.131-86
≤160 ≥430 540-735 ≥14 ≥50 ≥490 187-229
≤160 ≥390 ≥490 ≥14 ≥50 - -
≤160 ≥430 540-735 ≥14 ≥50 ≥490 187-229
≤160 ≥390 ≥490 ≥14 ≥50 - -
≤160 ≥530 635-835 ≥13 ≥50 ≥490 207-225
≤160 ≥490 ≥550 ≥12 ≥45 - -

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
y The relative narrowing
kJ/m2 Toughness

Our consultant will save your time

+49 (170) 650 7006
E-mail: info@auremo.eu
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
brass wire, 10X17H13M2T circle, 15h25t sheet, Titanium tape, chromel