By visiting this site, you accept the use of cookies. More about our cookie policy.

Nickel NP2JE

Nickel NP0Evi Nickel NP1 Nickel NP1Ev Nickel NP2 Nickel NP2E Nickel NP3 Nickel NP4 Nickel NPA1 Nickel NPA2 Nickel NPAN Alloy SD1-1 Alloy SD1-2 Alloy SD1-4

Designation

Name The value
Designation GOST Cyrillic НП2Э
Designation GOST Latin HP2E
Transliteration NP2Eh
The chemical elements NiП2Э

Description

Nickel NP2JE used: for the manufacture of strips, rolled sections and anodes; Travers and other parts of electronic devices; tape thickness of 0.05−2.0 mm, used in electronics and other industries.

Note

A complete analog of the Nickel brand NP2JE according to ST SEV 1257−78 is Nickel Ni 99,6 brand.

Standards

Name Code Standards
Pipes from non-ferrous metals and alloys В64 GOST 13548-77
Non-ferrous metals, including rare metals, and their alloys В51 GOST 19241-80, GOST 28873-90
Tapes В54 GOST 2170-73, TU 48-21-567-78
Wire of non-ferrous metals and their alloys В74 GOST 2179-75

Chemical composition

Standard C S P Mn Si Ni Fe Cu As Al Zn Sn Sb Pb Bi Co Mg Cd
GOST 19241-80 ≤0.1 ≤0.003 ≤0.002 ≤0.03 ≤0.1 The rest ≤0.1 ≤0.1 ≤0.002 ≤0.01 ≤0.005 ≤0.002 ≤0.002 ≤0.002 ≤0.002 ≤0.15 ≤0.1 ≤0.002
Ni is the basis.
According to GOST 19241-80, the total content of nickel and cobalt is ≥ 99.60%. In nickel grade NP2Ev, obtained by vacuum melting, the mass fraction of impurities of lead, cadmium, arsenic, antimony, bismuth and phosphorus should be ≤ 0.0010% of each element, zinc ≤ 0.0030%.

Mechanical characteristics

σB, MPa d5, % d10
Tape supplied according to GOST 2170-73 (samples)
≥390 ≥35 ≥32
≥440 ≥12 ≥10
≥540 ≥3 ≥2

Description mechanical marks

Name Description
σB Limit short-term strength
d5 Elongation after rupture
d10 Elongation after rupture

Our consultant will save your time

+49(1516) 758 59 40
E-mail:
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
Tape brkmts3-1, bronze Wire, 15h25t circle, Precision pipe, Circle brazh9-4