Bronze ВБр3
Bronze БрА9Ж4Н4Мц1 (БрАЖНМц9-4-4-1)
Bronze VBr3
Bronze BrSu6F0.9 (VB24)
Bronze BrSu6C12F0.3 (VB23)
Bronze BrSu6N2Ts1 (VB24H)
Bronze BrSu4N5C3C20F0.3 (VBr2)
Bronze BrSu3NTs3C20F0.2 (VB23NTs)
BrSu3N3C3S20F bronze
Bronze BrSu3NTs3C20K0.6F0.2 (VB23NTsK)
Bronze BrS60H2,5
Bronze BrS3C30 (BrSS3-30)
Bronze BrS30
Bronze БрО1С22 (БрОС1-22)
Bronze БрА9Мц2Л (БрАМц9-2Л)
Bronze БрА9Ж4Н4 (БрАЖН9-4-4)
Bronze БрААЖ9Ж3Л (БрАЖ9-4Л)
Bronze БрА7Н4Ж2Л
Bronze БрА7Мц15Ж3Н2Ц2 (Neva-70)
Bronze БрА7Мц14Ж3Н2
Bronze БрА7Ж2,5Н1,5МП9
Bronze БрА7Ж1,5С1,5
Bronze БрАЖ6Н6 (БрАЖН11-6-6)
Bronze БрАА10Мц2Л (БрАМц10-2Л)
Bronze БрАЖ10Ж4Н4Л (БрАЖН10-4-4Л)
Bronze БрА10Ж3р (БрВАЖ9-4Л)
Bronze БрААЖ3Мц2 (БрАЖМц10-3-2)
Bronze БрА10Ж3 (БрВАЖ9-4)
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ВБр3 |
| Designation GOST Latin | BBp3 |
| Transliteration | VBr3 |
| The chemical elements | ВBa3 |
Description
Bronze ВБр3 used: for the manufacture of castings in-the-blanks parts of critical purpose and details of special and marine engineering methods of centrifugal casting, chill casting fixed and pulling from a melt.
Note
Aluminum-Nickel bronze.
Standards
| Name | Code | Standards |
|---|---|---|
| Castings from non-ferrous metals and alloys | В84 | OST 1 90072-72 |
Chemical composition
| Standard | S | P | Mn | Cr | Si | Ni | Fe | Cu | As | Al | Ti | Sb | Pb | Bi |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OST 1 90072-72 | ≤0.01 | ≤0.002 | 0.4-1 | 0.8-1.3 | 0.6-1 | 16-18 | 1.2-1.6 | The rest | ≤0.01 | 3-3.5 | 0.5-1 | ≤0.005 | ≤0.002 | ≤0.002 |
Cu is the basis.
In accordance with OST 1 90072-72, the total content of all impurities should not exceed 0.031%.
In accordance with OST 1 90072-72, the total content of all impurities should not exceed 0.031%.
Mechanical characteristics
| Section, mm | σB, MPa | d5, % | Brinell hardness number, MPa |
|---|---|---|---|
| Billet-casting as supplied by OST 1 90072-72. Without heat treatment | |||
| ≥687 | ≥1.5 | ≥260 | |
| ≥638 | ≥0.8 | ≥260 | |
| Образец 1/2R | ≥687 | ≥1.5 | ≥260 |
Description mechanical marks
| Name | Description |
|---|---|
| Section | Section |
| σB | Limit short-term strength |
| d5 | Elongation after rupture |
