Aluminium AD00 (1010)
Designation
| Name |
The value |
| Designation GOST Cyrillic |
АД00 |
| Designation GOST Latin |
AD00 |
| Transliteration |
AD00 |
| The chemical elements |
- |
| Name |
The value |
| Designation GOST Cyrillic |
1010 |
| Designation GOST Latin |
1010 |
| Transliteration |
1010 |
| The chemical elements |
1010 |
Description
Aluminium AD00 used: for the manufacture of semi-finished products (sheets, tapes, strips, plates, profiles, panels, rods, tubes, wire, stampings and forgings) by hot or cold deformation, slabs and ingots; extruded pipes with controlled inner diameter from 14 to 42 mm for heat exchangers.
Note
ISO 209−1 aluminium brand AD00 is designated А199,7 and 1070А, aluminum brand AD00E (with guaranteed electrical characteristics) is designated ЕА199,7 and 1370.
Standards
| Name |
Code |
Standards |
| Tapes |
В54 |
GOST 13726-97, OST 1-92006-79, TU 1-2-133-77 |
| Sheets and stripes |
В53 |
GOST 17232-99, GOST 21631-76, OST 1-92045-75 |
| Pipes from non-ferrous metals and alloys |
В64 |
GOST 18482-79, OST 4-021.129-78, OST 4.021.129-92, TU 1-3-041-91, TU 1-9-1057-80, TU 1-9-194-72, TU 1-9-340-73, TU 1-3-67-90, TU 1-3-67-98 |
| Non-ferrous metals, including rare metals, and their alloys |
В51 |
GOST 4784-97, OST 4.021.009-92, TU 1-4-162-80 |
| Sectional and shaped rolling |
В52 |
GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92, OST 1 92093-83 |
| Metal forming. Forgings |
В03 |
OST 26-01-152-82 |
| Bars |
В55 |
TU 1-2-253-78 |
Chemical composition
| Standard |
Mn |
Si |
Fe |
Cu |
Al |
Ti |
Zn |
Mg |
| GOST 4784-97 |
≤0.03 |
≤0.2 |
≤0.25 |
≤0.03 |
≥99.7 |
≤0.03 |
≤0.07 |
≤0.03 |
Al is the base.
According to GOST 4784-97, the mass fraction of other impurities is ≤ 0.03% each, the total mass fraction of all impurities is ≤ 0.30%. For aluminum grade AD00E (with guaranteed electrical characteristics), the mass percentages of impurities are set: silicon ≤ 0.10%, copper ≤ 0.020%, manganese ≤ 0.010%, magnesium ≤ 0.020%, chromium ≤ 0.010%, iron ≤ 0.25%, zinc ≤ 0.040%, boron ≤ 0.020, titanium + vanadium ≤ 0.020%.
Mechanical characteristics
| Section, mm |
sT|s0,2, MPa |
σB, MPa |
d5, % |
d |
| The tape is able to supply for OST 1-92006-79 |
| 5-10.5 |
- |
≥68.6 |
- |
≥15 |
| 0.25-0.5 |
- |
≥58.8 |
- |
≥20 |
| 0.5-0.9 |
- |
≥58.8 |
- |
≥25 |
| 0.9-10.5 |
- |
≥58.8 |
- |
≥28 |
| 0.25-0.8 |
- |
≥147.7 |
- |
≥3 |
| 0.8-3.5 |
- |
≥147.7 |
- |
≥4 |
| 3.5-4 |
- |
≥147.4 |
- |
≥5 |
| Sheet metal in delivery condition according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse) |
| 5-10.5 |
- |
≥70 |
- |
≥15 |
| 0.3-0.5 |
- |
≥60 |
- |
≥20 |
| 0.5-0.9 |
- |
≥60 |
- |
≥25 |
| 0.9-10.5 |
- |
≥60 |
- |
≥30 |
| 0.3-0.8 |
- |
≥145 |
- |
≥3 |
| 0.8-3.5 |
- |
≥145 |
- |
≥4 |
| 3.5-10.5 |
- |
≥130 |
- |
≥5 |
| 0.8-4.5 |
- |
≥100 |
- |
≥6 |
| Plates according to GOST 17232-99. 4.021.061-92 supplied without heat treatment (samples transverse) |
| 11-25 |
- |
≥78 |
≥18 |
- |
| 25-80 |
- |
≥64 |
≥15 |
- |
| Forging after annealing at OST 26-01-152-82 |
|
≥20 |
≥60 |
≥25 |
- |
| Extruded aluminum tubes with internal diameter control for heat exchangers as supplied without a heat treatment on the other 1-3-67-90 (in the section you specify an internal pipe diameter |
| 14-42 |
- |
59-98 |
- |
≥28 |
| Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall) |
|
- |
≥60 |
- |
≥20 |
| Tube, drawn, seamless rectangular cross section as delivered to EAST 4.021.129-92, TU 1-9-194-72 |
|
- |
≥58.8 |
- |
≥12 |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| sT|s0,2 |
Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
| σB |
Limit short-term strength |
| d5 |
Elongation after rupture |
| d |
Elongation after rupture |
Physical characteristics
| Temperature |
r, кг/м3 |
| 0 |
2700 |
A description of the physical symbols
| Name |
Description |
| Е |
The normal elasticity modulus |
| r |
Density |
| l |
Coefficient of thermal conductivity |
| R |
UD. the resistivity |
| С |
Specific heat |
