By visiting this site, you accept the use of cookies. More about our cookie policy.

Aluminium AD0 (1011)

Aluminum 1050 Aluminum 1145 Aluminum AD (1015) Aluminum AD0 (1011) Aluminum AD00 (1010) Aluminum AD000 Aluminum AD1 (1013) ADS Aluminum

Designation

Name The value
Designation GOST Cyrillic АД0
Designation GOST Latin AD0
Transliteration AD0
The chemical elements -
Name The value
Designation GOST Cyrillic 1011
Designation GOST Latin 1011
Transliteration 1011
The chemical elements 1011

Description

Aluminium AD0 is used: for the manufacture of flat ingots, cast by semi-continuous method or continuous casting, and is intended for rolling into sheets, strips and other semi-finished products (strips, plates, profiles, panels, rods, tubes, drawn wire, stampings and forgings) by hot or cold deformation, as well as ingots and slabs; the profiles pressed extra virgin for the manufacture of radiators of cooling of semiconductor devices; extruded pipes with controlled inner diameter from 14 to 42 mm for heat exchangers; compressed large pipes; Polutov and profiles for cold end; foil used for the manufacture of condensers; heat exchangers evaporators and condensers with two-sided bulge of the channel used in domestic refrigerators and freezers; roll foil used for thermal, hydro and sound insulation; cold-rolled foil intended for packaging of food, drugs, medical devices, cosmetic products industry, as well as for the production of packaging materials based on it.

Note

ISO 209−1 aluminum brand AD0 is designated А199,5 and 1050А, aluminum brand AD0E (with guaranteed electrical characteristics) is designated ЕА199,5 and 1350.

Standards

Name Code Standards
Tapes В54 GOST 1018-77, GOST 13726-97, TU 1-2-133-77, TU 1-2-421-81, TU 1-2-432-82, TU 1-2-433-82, TU 1-2-434-82
Pipes from non-ferrous metals and alloys В64 GOST 18475-82, GOST 18482-79, OST 1 92048-90, OST 1 92048-76, OST 1 92047-76, TU 1-3-041-91, TU 1-3-118-91, TU 1-3-138-91, TU 1-5-027-77, TU 1-3-67-90, TU 1-3-094-93, TU 1-3-67-98
Bars В55 GOST 21488-97, TU 1-2-253-78
Non-ferrous metals, including rare metals, and their alloys В51 GOST 4784-97, GOST 9498-79, GOST 19437-81, TU 1-1-166-79, TU 1-4-119-81, TU 1-4-162-80, TU 1-4-242-89
Sheets and stripes В53 GOST 618-73, GOST 17232-99, GOST 21631-76, GOST 25001-81, GOST 25905-83, GOST 745-2003, TU 1-9-1048-87
Sectional and shaped rolling В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92, OST 1 92093-83, TU 1-2-368-77, TU 1-9-631-73
Wire of non-ferrous metals and their alloys В74 OST 1 92005-2002
Metal forming. Forgings В03 OST 26-01-152-82

Chemical composition

Standard Mn Si Fe Cu Al Ti Zn Mg
GOST 4784-97 ≤0.05 ≤0.25 ≤0.4 ≤0.05 ≥99.5 ≤0.05 ≤0.07 ≤0.05
Al is the base.
According to GOST 4784-97, the mass fraction of other impurities is ≤ 0.03% of each, the total mass fraction of all impurities is ≤ 0.50%. In AD0 grade aluminum for sheet blanks subjected to further forming, titanium can be introduced up to 0.15%. For aluminum ADOE (with guaranteed electrical characteristics), the mass percentages of impurities are set: silicon ≤ 0.10%, copper ≤ 0.050%, manganese ≤ 0.010%, chromium ≤ 0.010%, iron ≤ 0.40%, zinc ≤ 0.050%, boron ≤ 0.050, titanium + vanadium ≤ 0.020%, the amount of other impurities (not regulated) ≤ 0.10%.

Mechanical characteristics

Section, mm sT|s0,2, MPa σB, MPa d5, % d d10
The tape is supplied according to GOST 1018-77 (samples)
0.3-0.7 - ≥70 - ≥20 -
0.3 - 100-150 - ≥2.5 -
0.35-0.7 - 120-150 - ≥3 -
Sheet metal in delivery condition according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse)
5-10.5 - ≥70 - ≥15 -
0.3-0.5 - ≥60 - ≥20 -
0.5-0.9 - ≥60 - ≥25 -
0.9-10.5 - ≥60 - ≥30 -
0.3-0.8 - ≥145 - ≥3 -
0.8-3.5 - ≥145 - ≥4 -
3.5-10.5 - ≥130 - ≥5 -
0.8-4.5 - ≥100 - ≥6 -
Plates according to GOST 17232-99 in the delivery condition (transverse specimens)
11-25 - ≥78 ≥18 - -
25-80 - ≥64 ≥15 - -
Forging after annealing at OST 26-01-152-82
≥30 ≥60 ≥25 - -
The wire drawn according to OST 1 92005-2002
≤12 - - - ≥20 -
Extruded normal strength according to GOST 8617-81 on delivery
- ≥59 ≥20 - -
The pressed bars normal strength in the delivery condition according to GOST 21488-97 (longitudinal samples)
8-300 - ≥60 ≥25 - -
Extruded aluminum tubes with internal diameter control for heat exchangers as supplied without a heat treatment on the other 1-3-67-90 (in the section you specify an internal pipe diameter)
14-42 - 59-98 - ≥28 -
Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall)
- ≥60 ≥20 - -
Large-size extruded tubes according to OST 1 92048-76 on delivery
- ≥59 ≥20 - -
Cold-rolled tubes in the delivery condition according to GOST 18475-82, OST 4.021.119-92 samples (in cross-section shows the thickness of the wall)
- ≥60 - - ≥20
≤2 - ≥80 - - ≥4
2-5 - ≥80 - - ≥5

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
d Elongation after rupture
d10 Elongation after rupture

Physical characteristics

Temperature Е, ГПа r, кг/м3 l, Вт/(м · °С) R, НОм · м a, 10-6 1/°С
20 71 2710 - 292 -
100 - - 226 - 24
200 - - - - 256

A description of the physical symbols

Name Description
Е The normal elasticity modulus
r Density
l Coefficient of thermal conductivity
R UD. the resistivity
С Specific heat

Our consultant will save your time

+49 (170) 650 7006
E-mail:
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
15h25t pipe, manganin wire, VT1-0 feed, HN32T pipe, Titanium rod