By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel 60Х3Г8Н8Ф

Steel 07Х17Н16 (EP626; 0Х17Н16) Steel 20Х12Н12Г6 (ЭИ429) Steel 50X4G18 Steel 5Х3Н12Г5 (Н12ХГ) Steel 60Х3Г8Н8В Steel 60Х3Г8Н8Ф Steel 75Х8Н34Г2В3 (ЭИ278)

Designation

Name The value
Designation GOST Cyrillic 60Х3Г8Н8Ф
Designation GOST Latin 60X3G8H8F
Transliteration 60H3G8N8F
The chemical elements 60Cr3Mn8Н8V

Description

60Х3Г8Н8Ф steel is used: for the manufacture of retaining rings of turbogenerators and other parts of the engineering requirements of namagnichennosti.

Note

The austenitic steel.
Absolute magnetic permeability at field strength of 1.6·104 A/m (200Э) must not exceed 1.4 x 10-6 Ng/m (1,1 GS/e).
Electrical resistivity shall not be less than 0,65·10-6 Ohm·m (0.65-Ohm·mm2/m).

Standards

Name Code Standards
Metal forming. Forgings В03 TU 24.00.3748-85

Chemical composition

Standard C S P Mn Cr Si Ni Fe V
TU 24.00.3748-85 0.58-0.68 ≤0.025 ≤0.04 7.5-9.5 3-4 ≤0.5 7.5-9 The rest 0.05-0.15
Fe is the basis.
At the manufacturer's discretion, vanadium in 60Х3Г8Н8Ф steel can be replaced by tungsten (mass fraction - 0,5-1,0%). In this case, the designation of the steel grade is changed to 60Х3Г8Н8В.

Mechanical characteristics

sT|s0,2, MPa σB, MPa d5, % y, %
The workpiece retaining ring - selection of samples for testing wall thickness 58-85 mm (strength category - I to V)
588 735 25 35
706 834 22 35
785-834 883-932 20 35
834-883 912-961 20 35
863-981 912-1040 20 35

Description mechanical marks

Name Description
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
y The relative narrowing

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
309 sheet, Nickel tape, hn35vt sheet, 08h20n9g7t wire, Stainless steel wire spring