Alloy Nmzhmc28-2,5-1,5
Alloy MNTS16-29-1.8
Alloy MNMts43-0.5 (Kopel)
Alloy MNMts5-3.7
Alloy MNMz60-20-20
Alloy MNMts68-4-2
Alloy MNMtsAZh3-12-0.25-0.2
Alloy MNMtsAZh3-12-0,3-0,3 (Manganin)
Alloy MNMtsAZhVTNb40-2-1,5-1,4 (MN40S)
Alloy MNMZh40-1,4-0,45
Alloy MNTs12-24
Alloy MNTs15-20 (Neusilber)
Alloy MNTs18-20
Alloy MNC18-27
Alloy MNMts4.5-1.5 (Alloy A)
Alloy Neusilber 30
Alloy NK
Alloy NK2.4 (Cilin)
Alloy HM25
Alloy NM40A
Alloy NM60A
Alloy NMZhMz28-2,5-1,5
Alloy NMMKZhMC30-4-2-1 (VKM)
Alloy NMMZTA26-1,5-1,1-0,5
Alloy NMCAT3-1,5-0,6
Alloy NMCATC1-1,5-2,5-0,15
Alloy NHC9-0.9 (Silch)
Alloy Alloy 273
Alloy MNA13-3 (Kunial A)
Castolin Alloy
Alloy MN0.6 (Alloy TP)
Alloy MN10
Alloy MN15
Alloy MH16 (Alloy TB)
Alloy MH17 (Alloy B)
Alloy MN19 (Melchior)
Alloy MN2.15
Alloy MN23
Alloy MN25
Alloy MN45 (Constantan)
Alloy MN6
Alloy MN95-5
Alloy MNMts40-1.5 (Constantan)
Alloy MNA6-1.5 (Kunial B)
Alloy MNAZHMZ6-0.8-0.8-0.6 (BS-3)
Alloy MNAKH11-2,5-1,0-0,8 (Alloy 131)
Alloy MNAHMC15-3,5-2-3 (Alloy 538)
Alloy MNAHMc20-4-3-4 (Alloy 546; Camelon)
Alloy MNAXMZ4,5-4,5-0,7-2,5 (Kamelin)
Alloy MNZh5-1
Alloy MNZh9.3-0.5 (Menigel)
Alloy MNZHKT5-1-0,2-0,2
Alloy MNZHMZ10-1-1
Alloy MNZHMZ30-1-1
Alloy MNMts3-12 (Manganin)
Designation
| Name |
The value |
| Designation GOST Cyrillic |
НМЖМц28-2,5-1,5 |
| Designation GOST Latin |
HMZhMts28-2,5-1,5 |
| Transliteration |
NMGMts28-25-15 |
| The chemical elements |
NiCuFeMn28-2,5-1,5 |
Description
Alloy Nmzhmc28−2,5−1,5 is used: for the manufacture of semi-finished products (strips, sheets, strips, rods) for the manufacture of corrosion-resistant parts for various purposes; wire for welding and cladding layer in the manufacture of hot-rolled dual-layer corrosion-resistant sheets.
Standards
| Name |
Code |
Standards |
| Sheets and stripes |
В33 |
GOST 10885-85 |
| Bars |
В55 |
GOST 1525-91, TU 48-21-901-91 |
| Non-ferrous metals, including rare metals, and their alloys |
В51 |
GOST 28873-90, GOST 492-2006 |
| Sheets and stripes |
В53 |
GOST 5063-73 |
| Tapes |
В54 |
GOST 5187-2003, TU 48-21-122-72 |
| Welding and cutting of metals. Soldering, riveting |
В05 |
TU 48-21-7-72 |
Chemical composition
| Standard |
C |
S |
P |
Mn |
Si |
Ni |
Fe |
Cu |
As |
Sb |
Pb |
Bi |
Mg |
Ni+Co |
| GOST 492-2006 |
≤0.2 |
≤0.01 |
≤0.01 |
1.2-1.8 |
≤0.05 |
65.813-69.8 |
2-3 |
27-29 |
≤0.01 |
≤0.002 |
≤0.003 |
≤0.002 |
≤0.1 |
The rest |
Ni is the basis.
According to GOST 492-2006, the total mass fraction of impurities is ≤ 0.60%.
Mechanical characteristics
| Section, mm |
σB, MPa |
d5, % |
d |
d10 |
| Cold-rolled steel strip as supplied by GOST 5187-2003 (samples transverse) |
| ≥0.5 |
≥440 |
- |
≥25 |
- |
| 0.5 |
≥440 |
- |
≥22 |
- |
| ≥0.5 |
≥570 |
- |
6.5 |
- |
| 0.5 |
≥570 |
- |
≥4 |
- |
| Cold-rolled strip in the delivery state according to GOST 5063-73 (samples transverse) |
|
≥440 |
- |
≥25 |
- |
|
≥570 |
- |
≥6.5 |
- |
| Rods are supplied according to GOST 1525-91 (longitudinal samples) |
| - |
≥490 |
≥20 |
- |
≥18 |
| - |
≥440 |
≥35 |
- |
≥25 |
| - |
≥590 |
≥18 |
- |
≥10 |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| σB |
Limit short-term strength |
| d5 |
Elongation after rupture |
| d |
Elongation after rupture |
| d10 |
Elongation after rupture |
Physical characteristics
| Temperature |
Е, ГПа |
r, кг/м3 |
R, НОм · м |
| 20 |
182 |
8820 |
430 |
A description of the physical symbols
| Name |
Description |
| Е |
The normal elasticity modulus |
| l |
Coefficient of thermal conductivity |
| R |
UD. the resistivity |
| С |
Specific heat |
Technological properties
| Name |
The value |
| Corrosion resistance |
The alloy is resistant. |
