Alloy 95НЛВФ (ЭИ996В)
Designation
| Name |
The value |
| Designation GOST Cyrillic |
95НЛВФ |
| Designation GOST Latin |
95HLBF |
| Transliteration |
95NLVF |
| The chemical elements |
95NiЛВP |
| Name |
The value |
| Designation GOST Cyrillic |
ЭИ996В |
| Designation GOST Latin |
EI996B |
| Transliteration |
EhI996V |
| The chemical elements |
- |
Description
95НЛВФ alloy usedfor producing the tape, sanded rods (silverfish) and wire for the manufacture of current-carrying and weight-elastic sensing elements Aviapribor and other devices operating at temperatures up to +300 °C.
Note
Alloy precipitation hardening corrosion resistant with low specific resistivity ≤0.26 Ω·mm2/m.
Standards
| Name |
Code |
Standards |
| Sectional and shaped rolling |
В32 |
TU 14-1-436-72 |
Chemical composition
| Standard |
C |
S |
P |
Mn |
Si |
Ni |
Fe |
V |
W |
Ce |
Be |
| TU 14-1-436-72 |
≤0.05 |
≤0.01 |
≤0.01 |
≤0.2 |
≤0.2 |
The rest |
≤0.3 |
0.2-0.3 |
1.7-2 |
≤0.05 |
2.1-2.5 |
Ni is the basis.
According to TU 14-1-436-72 the chemical composition is given for the alloy grade 95NLVF-VI. In the alloy, deviations from the chemical composition for silicon - plus 0.10%, for iron - plus 0.20%, for vanadium - plus 0.10% are allowed. Cerium is introduced into the metal by calculation and chemical analysis is not determined.
Mechanical characteristics
| Section, mm |
sT|s0,2, MPa |
σB, MPa |
d |
d10 |
HRC |
HRB |
| Tape on the other 14-1-436-72 after quenching in water from 1070±10 °C |
|
≤393 |
≤834 |
- |
≥35 |
- |
≤100 |
| Tape on the other 14-1-436-72 after quenching in water from 1070±10 °C and the dispersion hardening at 540±10 °C (aging of 1.0-2.0 h) |
|
≥1030 |
≥1324 |
- |
≥12 |
≥50 |
- |
| Tape on the other 14-1-436-72 after quenching in water from 1070±10 °C, 35% cold working and dispersion hardening at 540±10 °C (exposure: 0.5-1.50 hours) |
|
≥1570 |
≥1864 |
- |
≥3 |
≥50 |
- |
| Wire cold-drawn at THAT 14-1-436-72 in the state of delivery: ø>1.5 mm after quenching with posleduyuschaya, ø≤1,5 mm magcaisa after heat treatment in a continuous furnace in the environment of hydrogen with subsequent deformation. The degree of deformation of the wire (shot peening) ø=4,1-7,0 mm is 60-20%, ø≤4.0 mm - 70-80% and polished bars ø=4,0-10,0 in the state of delivery on the other 14-1-436-72 after quenching with subsequent deformation of up to 35% |
|
- |
≥1080 |
≥7 |
- |
- |
- |
| Wire cold-drawn at THAT 14-1-436-72 in the state of delivery: ø>1.5 mm after quenching with posleduyuschaya, ø≤1,5 mm magcaisa after heat treatment in a continuous furnace in the environment of hydrogen with subsequent deformation. The degree of deformation of the wire (shot peening) ø=4,1-7,0 mm is 60-20%, ø≤4.0 mm - 70-80% and polished bars ø=4,0-10,0 in the state of delivery on the other 14-1-436-72 after quenching with subsequent deformation of up to 35% + of the Dispersion hardening at 540±10 °C (endurance 2.0 hours) |
|
- |
≥1864 |
≥4 |
- |
- |
- |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| sT|s0,2 |
Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
| σB |
Limit short-term strength |
| d |
Elongation after rupture |
| d10 |
Elongation after rupture |
| HRC |
Rockwell hardness (indenter diamond spheroconical) |
| HRB |
Rockwell hardness (indenter steel, spherical) |
