By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy 35NKT

Designation

Name The value
Designation GOST Cyrillic 35НКТ
Designation GOST Latin 35HKT
Transliteration 35NKT
The chemical elements 35NiCoTe

Description

Alloy 35NKT used: for the manufacture of parts of instruments, operating with increased loads.

Note

Alloy dispersion-hardened with a CTE of no more than 3.5·10-6 deg-1 in the temperature range from plus 20 to plus 60 °C and from plus 20 to minus 60 °C with the temporary resistance not less than 105 kgf/mm2.

Standards

Name Code Standards
Classification, nomenclature and general norms В30 GOST 10994-74
Sectional and shaped rolling В32 TU 14-11-245-88

Chemical composition

Standard C Mn Si Ni Fe Cu Ti Co
GOST 10994-74 ≤0.05 ≤0.4 ≤0.5 34-35 The rest 0.2-0.4 2.3-2.8 5-6
Fe is the basis.

Mechanical characteristics

σB, MPa d5, %
After annealing
1150-1200 8-10

Description mechanical marks

Name Description
σB Limit short-term strength
d5 Elongation after rupture

Our consultant will save your time

+49 (170) 650 7006
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)