By visiting this site, you accept the use of cookies. More about our cookie policy.

Copper M1F

Copper M1b Copper M3r Copper M3 Copper M2p Copper M2k Copper M2 Copper M1f Copper M1u Copper M1r Copper M1k Copper M1 Copper M0k Copper M0b Copper M00k Copper M00b Copper M00 Copper M0 Copper AMFu Copper AMF

Designation

Name The value
Designation GOST Cyrillic М1ф
Designation GOST Latin M1f
Transliteration M1f
The chemical elements Cu1ф

Description

Copper M1 °F used: for the production of cold-rolled foil and strip, cold-rolled and hot-rolled sheets and plates of General purpose; seamless drawn pipes used in drinking water systems, hot and cold water, water (steam) heating, cooling, sewage, water treatment plants and gas supply.

Note

M1 °F copper obtained by melting of cathodes and scrap copper deoxidation with phosphorus.
Copper grade M1 °F chemical composition to the copper grade Cu-DHP according to Euronorm EN 1652:1998.

Standards

Name Code Standards
Tapes В54 GOST 1173-2006
Bars В55 GOST 1535-2006
Non-ferrous metals, including rare metals, and their alloys В51 GOST 859-2001
Pipes from non-ferrous metals and alloys В64 GOST Р 52318-2005, GOST 617-2006

Chemical composition

Standard S P Ni Fe Cu As Zn Sn Sb Pb Bi
GOST 1173-2006 ≤0.005 0.012-0.04 ≤0.002 ≤0.005 The rest ≤0.002 ≤0.005 ≤0.002 ≤0.002 ≤0.005 ≤0.001
Cu is the basis.
According to GOST 1173-2006, GOST 1535-2006 and GOST 859-2001 the total content of Cu + Ag is ≥ 99.90%.

Mechanical characteristics

Section, mm σB, MPa d5, % d10 Brinell hardness number, MPa HV, MPa
Ribbons and leaves (≥0.5 mm) as supplied
- ≥200 - ≥30 - -
- 200-260 ≥45 ≥36 ≥55 40-65
- 240-310 ≥15 ≥12 ≥75 65-95
- ≥290 ≥6 ≥3 ≥95 90-110
Bars according to GOST 1535-2006 in the delivery condition (longitudinal samples)
- ≥190 ≥35 ≥30 ≥35 ≥40
- ≥200 ≥40 ≥35 ≥40 40-65
- ≥240 ≥15 ≥10 ≥60 70-95
- ≥270 ≥8 ≥5 ≥70 90-115
Tube, drawn, seamless water and gas in the state of delivery according to GOST R 52318-2005 (samples, in cross-section is specified outside diameter of pipe)
6-22 ≥220 ≥40 - - 40-70
6-54 ≥250 ≥20 - - 75-100
6-267 ≥290 ≥3 - - ≥100
Pipe humanitariannet and extruded in the state of delivery according to GOST 617-2006 (in cross-section is specified outside diameter, in brackets are the values for pipes with improved plasticity and strength)
≤360 ≥200 (210) ≥38 ≥35 (40) - ≤55
≤360 ≥240 (270) ≥10 ≥8 (8) - -
≤200 ≥190 ≥32 ≥30 - ≤80
200 ≥180 ≥32 ≥30 - -
≤360 ≥280 (310) - - - 90-135

Description mechanical marks

Name Description
Section Section
σB Limit short-term strength
d5 Elongation after rupture
d10 Elongation after rupture
HV The Vickers hardness

Physical characteristics

Temperature Е, ГПа r, кг/м3 l, Вт/(м · °С) R, НОм · м С, Дж/(кг · °С)
20 132 8940 387 178 390

A description of the physical symbols

Name Description
Е The normal elasticity modulus
l Coefficient of thermal conductivity
R UD. the resistivity

Our consultant will save your time

+49 (170) 650 7006
E-mail:
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
HN65MV pipe, 08h17t sheet, brh1 plate, 36nhtyu pipe, Magnesium ma2-1