Welding and cutting of non-ferrous metals and alloys

Welding non-ferrous alloys

When working with any material, it is important to consider its technological properties:
-reaction with gases;
-level of thermal conductivity;
The level of thermal conductivity; -Changes in material characteristics under the influence of high temperatures.
When welding alloys, you should consider the difference in melting and boiling points of the elements in the alloy. These metals in terms of weldability are conditionally divided into groups:
-light;
-fusible;
-precious.

Plasma welding

This method has proven to be excellent for non-ferrous metals of the first group. During plasma welding, aluminum parts are minimally deformed due to the lower propagation of high temperatures. Moreover, using plasma, it is easy to remove the oxide film. Plasma welding does not allow foreign impurities to enter, which positively affects the strength and reliability of the welded joint.

Manual arc welding

Hand arc welding or electron beam welding is recommended for working with refractory and active non-ferrous metals. These are metals such as tungsten, vanadium, zirconium, titanium and niobium.

Argon gas welding

Another common way to formalize compounds is welding alloys with a semi-automatic machine in an argon environment. The fact is that this gas is inert and protects the welding joint from oxidation. That is why the joint is characterized by low porosity and high strength.

About gas welding

Gas welding can be used for heavy non-ferrous metals and alloys, but with a few caveats. First of all, a very important element of the process is strict compliance with the technology. That is, you can entrust this type of work only to a qualified specialist with appropriate experience. Secondly, (for copper products in particular) the welds obtained must necessarily be forged.

Cutting of non-ferrous metals

In addition to plasma welding, there is also plasma cutting of non-ferrous metals, the advantages of which:
-high productivity;
-The absence of thermal deformation of the workpiece;
-Excellent clean cut;
-Economy;
-safety.
To work with parts of more complex configuration laser cutting of non-ferrous metal is used as the most advanced method of processing.

The supplier

Supplier "Auremo" offers to buy non-ferrous metals and alloys in bulk or in installments. Large selection of semi-finished products in stock. Optimal price of base metal from the supplier of "Auremo". Buy base metal today. For wholesale customers - the price of non-ferrous metals and alloys preferential.

Buy a great price from "Auremo".

Supplier "Auremo" sells non-ferrous rolled metal on the European market in wholesale and retail batches. Delivery time is minimal. With us you can buy non-ferrous metals and alloys at the best price. Experienced managers - experts of the modern market will promptly help you to buy non-ferrous metals and alloys. The semi-finished products presented in the warehouse are certified. The quality corresponds to GOST and international standards. The price of non-ferrous metal depends on the order volume and additional delivery terms. For wholesale customers the prices of non-ferrous metals and alloys are preferential. Auremo" invites to buy nonferrous metals and alloys today. In the segment of non-ferrous rolled metal, Auremo is a profitable supplier. The best price of non-ferrous metals and alloys from the supplier.