Zinc C1
Designation
| Name |
The value |
| Designation GOST Cyrillic |
Ц1 |
| Designation GOST Latin |
Ts1 |
| Transliteration |
Ts1 |
| The chemical elements |
Zn1 |
Description
Zinc C1 is used: for the production of alloys pressure treated; the manufacture of electrochemical cells; hot-rolled anodes used for zinc plating of parts by electroplating; zinc powder; alloying and blending of brass and special copper-zinc alloys; production of zinc boiler plates, made by rolling and are used in the shipbuilding industry as protectors for the protection of boilers and other heating devices from corrosion; round wire (1,50−3,20 mm), designed for applying zinc coatings spray; tape General purpose thickness of 0.12−2.0 mm and a width of 20−280 mm, applied in electrical, automotive and other industries.
Standards
| Name |
Code |
Standards |
| Sheets and stripes |
В53 |
GOST 1150-72, GOST 1180-91 |
| Wire of non-ferrous metals and their alloys |
В74 |
GOST 13073-77 |
| Non-ferrous metals, including rare metals, and their alloys |
В51 |
GOST 3640-94 |
| Tapes |
В54 |
GOST 598-90, GOST 18327-73 |
Chemical composition
| Standard |
Fe |
Cu |
As |
Al |
Zn |
Sn |
Pb |
Cd |
| GOST 3640-94 |
≤0.01 |
≤0.002 |
≤0.0005 |
≤0.005 |
≥99.95 |
≤0.001 |
≤0.02 |
≤0.01 |
Zn is the basis.
According to GOST 3640-94, the total mass fraction of normalized impurities should be ≤ 0.050%.
Mechanical characteristics
| Section, mm |
σB, MPa |
d5, % |
| Zinc in the state of delivery |
|
120-170 |
40-50 |
|
120-140 |
0.3-0.5 |
| 0.3 |
≥100 |
≥15 |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| σB |
Limit short-term strength |
| d5 |
Elongation after rupture |
Physical characteristics
| Temperature |
Е, ГПа |
r, кг/м3 |
| 20 |
95 |
7130 |
A description of the physical symbols
| Name |
Description |
| Е |
The normal elasticity modulus |
| l |
Coefficient of thermal conductivity |
| R |
UD. the resistivity |
