By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy ВТ6Л

Alloy VT14L Alloy VT1L Alloy VT20L Alloy VT21L Alloy VT40L Alloy VT5L Alloy VT6L Alloy VT9L Alloy ET2 Alloy ET3 Alloy ET5 Alloy ET7 To access the entire list

Designation

Name The value
Designation GOST Cyrillic ВТ6Л
Designation GOST Latin BT6L
Transliteration VT6L
The chemical elements ВTe6

Description

Alloy ВТ6Л used: for the production of highly loaded casting of details of responsible appointment fill in a chemically neutral form: of cast housings of aircraft engines, turbines, impellers etc.

Standards

Name Code Standards
Non-ferrous metals, including rare metals, and their alloys В51 OST 1 90030-77
Castings from non-ferrous metals and alloys В84 OST 1 90060-92

Chemical composition

Standard C Si Fe N Al V Ti W O Zr H
OST 1 90030-77 ≤0.12 ≤0.12 ≤0.3 ≤0.05 5.4-6.8 3.5-5.3 The rest ≤0.2 ≤0.15 ≤0.3 ≤0.01
Ti is the basis.
According to OST 1 90030-77 the amount of other (not indicated) impurities should be no more than 0.30%. The total content in the alloy of chromium and manganese is allowed not more than 0.15%. The total content of copper and nickel in the alloy is allowed in an amount not exceeding 0.10%, including nickel not more than 0.080%.

Mechanical characteristics

sT|s0,2, MPa σB, MPa d y, % kJ/m2, кДж/м2
Casting as supplied after annealing
≥795 883-1080 ≥5 ≥10 ≥245

Description mechanical marks

Name Description
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d Elongation after rupture
y The relative narrowing
kJ/m2 Toughness

Our consultant will save your time

+49(1516) 758 59 40
E-mail: info@auremo.eu
Telegram:
WhatsApp:
Ask a question

Subscription

Special offers and discounts. :)
VT1-00 wire, Inconel alloy, Tape brkmts3-1, copper plate, Bronze