Alloy ХК62М6Л
Steel 03Х18Н15М (ЗИ132)
Steel 03Х18Н16М3 (ЗИ133)
Steel 100X13M (EI515)
Steel 25Х18Н9С2 (ЭИ95)
Alloy 35N32KHM
Alloy 45KHNMVT
Alloy 48KHVN
Alloy KhK62M6L
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ХК62М6Л |
| Designation GOST Latin | XK62M6L |
| Transliteration | HK62M6L |
| The chemical elements | CrCo62Cu6 |
Description
Alloy ХК62М6Л used: for the production of cast bars intended for the manufacture of artificial joints without harmful effects to the human body by casting.
Note
The cast alloy on cobalt base.
Standards
| Name | Code | Standards |
|---|---|---|
| Sectional and shaped rolling | В32 | GOST 31623-2012 |
| Steel alloy wire | В73 | GOST Р 51395-99 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | Mo | Co |
|---|---|---|---|---|---|---|---|---|---|---|
| GOST Р 51395-99 | ≤0.35 | ≤0.015 | ≤0.02 | ≤1 | 26.5-30 | ≤1 | ≤1 | ≤1 | 4.5-7 | The rest |
Co is the basis.
In accordance with GOST R 51395-99, minor deviations in the mass fraction of the elements specified in the table are allowed in agreement with the health authorities, without entailing changes in the structure and mechanical properties of the alloy.
In accordance with GOST R 51395-99, minor deviations in the mass fraction of the elements specified in the table are allowed in agreement with the health authorities, without entailing changes in the structure and mechanical properties of the alloy.
Mechanical characteristics
| Section, mm | sT|s0,2, MPa | σB, MPa | d5, % | kJ/m2, кДж/м2 |
|---|---|---|---|---|
| Alloy rods supplied according to GOST R 51395-99. Cast samples, thermal treatment mode is selected by the manufacturer to achieve desired properties | ||||
| ≥450 | ≥665 | ≥8 | ≥8 | |
Description mechanical marks
| Name | Description |
|---|---|
| Section | Section |
| sT|s0,2 | Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2% |
| σB | Limit short-term strength |
| d5 | Elongation after rupture |
| kJ/m2 | Toughness |
