By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel A35

Designation

Name The value
Designation GOST Cyrillic А35
Designation GOST Latin A35
Transliteration A35
The chemical elements -

Description

A35 steel is used: for the production of complex-shaped parts, processed by CNC-machines and parts, which are increased requirements to the surface quality, operating at higher voltages and pressures (axles, rollers, bushings, rings, gears, fingers, screws, bolts, nuts).

Note

Sulfur carbon steel high machinability.

Standards

Name Code Standards
Sectional and shaped rolling В52 GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92
Sectional and shaped rolling В32 GOST 1414-75, GOST 14955-77

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu
GOST 1414-75 0.32-0.4 0.08-0.15 ≤0.06 0.7-1 ≤0.25 0.15-0.35 ≤0.25 The rest ≤0.25
Fe is the basis.

Mechanical characteristics

Section, mm σB, MPa d5, % y, % Brinell hardness number, MPa
The hot rolled, without heat treatment
≥510 ≥15 ≥23 ≤201
Rental of calibrated and full hard without heat treatment
≥570 ≥6 - ≤229

Description mechanical marks

Name Description
Section Section
σB Limit short-term strength
d5 Elongation after rupture
y The relative narrowing

Technological properties

Name The value
Propensity to temper brittleness tend not
Flock-sensitive sensitivity not sensitive

Our consultant will save your time

+49(1523) 72 15 100
E-mail:
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)