Steel SV-10ХМФТУ
Steel Sv-10GN3SMD
Sv-08GSMT steel
Steel Sv-08H15N23V7G7M2 (EP88)
Steel Св-08Х19Н10Г2Б (ЭИ898; Н-89)
Steel Sv-08X1Du
Steel Св-08Х20Н9С2БТЮ (EP156)
Steel Св-08Х25Н20С3Р1 (EP532)
Steel Sv-08HG2SDU
Sv-08HN2GMTA steel
Sv-09HNMTA steel
Sv-09HNMTAA steel
Sv-09HN4MDTA steel
Sv-10HN1MA steel
Sv-10HN2SMD steel
Sv-08GM steel
Sv-10GSM steel
Sv-10Nu steel
Steel Sv-10Kh16N25AM6 (EI395; H-66)
Steel Св-10Х16Н25М6АФ (ЗИ112)
Steel Sv-10H19N11M4F (EP647)
Sv-10H19H23G2M5FAT (EP868)
Steel Sv-10Х21Н11ФТ (EP854)
Sv-10X2M steel
Sv-10HGSN2MT steel
Sv-10KhMFTU steel
Sv-10KhMFTU-A steel
Sv-12M steel
Sv-12Kh2NMA steel
Steel Sv-06H15N35G7M6B (EP582)
Steel Sv-01Kh12N6M (ChS48)
Steel Св-01Х19Н18Г10АМ4 (EP690)
Steel Sv-03GKhN2MD
Steel Sv-03GKhN3MD
Steel Sv-03HN3MD
Sv-04N2GSTA steel
Sv-04N2GTA steel
Sv-04N3GMTA steel
Sv-04N3GSMTA steel
Steel Sv-04H19H11M3 (H-65)
Sv-04Cr19Ni (04Cr19N9) steel
Sv-04H20N10G2B (EP762)
Sv-06H14GMFBA steel
Steel Sv-08GN2SMD
Steel Sv-06Х21Н7БТ (EP500)
Sv-06Cr3G2SmFtu4 steel
Sv-06Kh8G2SMFtu4 steel
Steel Sv-07H22H13G5ST (ChS49)
Steel Sv-07Cr25H13 (H-71)
Steel Sv-07CGSN3MD
Steel Sv-07HN3MD
Sv-08 steel
Sv-08G1NMT steel
Sv-08G1S steel
Sv-08G2SM steel
Sv-08G2SNMT steel
Sv-08G2SNTYR steel
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | Св-10ХМФТУ |
| Designation GOST Latin | Cb-10XMFTU |
| Transliteration | Sv-10HMFTU |
| The chemical elements | 10CrMoVTiC |
Description
Steel SV-10ХМФТУ used: for the production of welding wire with a diameter of 1.6 to 6.0 mm used in nuclear power engineering and petrochemical engineering; in combination with flux an-42 for manual and automatic welding under the flux layer of heat-resistant steels pearlitic class of reactor vessels and other nuclear power equipment; steel type 15Х2МФА and 15Х2МФА (A) various modifications category КП45 strength at 350 °C in thicknesses up to 400 mm, including a narrow-gap butchering.
Note
Corrosion-resistant steel.
Standards
| Name | Code | Standards |
|---|---|---|
| Welding and cutting of metals. Soldering, riveting | В05 | TU 14-1-4818-2008 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | Cu | N | V | Ti | Mo |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-4818-2008 | 0.07-0.12 | ≤0.012 | ≤0.01 | 0.4-0.7 | 1.4-1.8 | ≤0.35 | ≤0.3 | The rest | ≤0.1 | ≤0.015 | 0.2-0.35 | 0.05-0.12 | 0.4-0.6 |
Fe is the basis.
According to TU 14-1-4818-2008 the chemical composition is given for steel grade Sv-10XMFTU. Deviations in chemical composition are allowed: for manganese -0,050%, for chromium and nickel -0.10% for each, for nitrogen + 0. 0050%, for the remaining elements - within the requirements of GOST 2246 for alloyed steel wire.
According to TU 14-1-4818-2008 the chemical composition is given for steel grade Sv-10XMFTU. Deviations in chemical composition are allowed: for manganese -0,050%, for chromium and nickel -0.10% for each, for nitrogen + 0. 0050%, for the remaining elements - within the requirements of GOST 2246 for alloyed steel wire.
Technological properties
| Name | The value |
|---|---|
| Features of production | The surface of wire should be clean and smooth, without cracks, delaminations, captured, sunsets, shells, dents, scale, rust, oil and other contaminants. On the surface of the wire allowed the risks (including covered), scratches, local Rabina and individual dents. The depth of these defects shall not exceed tolerances for the wire diameter. On the surface of the wire allowed the traces of soap and grease and plaque hydroxide. |
