By visiting this site, you accept the use of cookies. More about our cookie policy.

Bronze Brmc5

Bronze БрХ0,6Цр0,05 (БрХЦр0,6-0,05) Bronze BrN10,5A0,5 (BrNA10,5-0,5) Bronze БрН2,5Х0,7К0,6 (БрНХК2,5-0,7-0,6) Bronze БрН5Мц2Т0,1 (БрНМцТ5-2-0,1) BrNTsr bronze Bronze BrSr0,1 Bronze БрТ5Х0,5 (БрТХ5-0,5) Bronze БрХ0,2Нб0,1 (Alloy 204А; БрХНб0,2-0,1) Bronze БрХ0,3Цр0,09 (БрХЦр0,3-0,09) Bronze БрХ0,4Ко0,4Кр0,2Мг0,04 (Alloy №50) Bronze БрХ0,4Нб0,25 (Alloy 204; БрХНб0,4-0,25) Bronze БрХ0,5В0,2Цр0,2 (ХВЦр0,5-0,2-0,2) Bronze БрХ0,6Т0,5 (БрХТ0,6-0,5) Bronze BrMc5 BrCr0.7 bronze Bronze БрХ0,8 Bronze BrX1 Bronze BrC1Cr Bronze BrChNb Bronze BrCNT Bronze BrCrK Bronze BrCrTV Bronze BrCr0,2 Bronze BrCr0,3 Bronze BrCr0,4 Bronze BrCr0.7 Bronze БрА9Ж4Н4Мц1 (БрАЖНМц9-4-4-1) Bronze BrB2 Bronze БрАЖ1,5 (БрАЖ10-1,5) Bronze БрААЖ3Мц1,5 (БрАЖМц10-3-1,5) Bronze БрААЖ10Ж4Н4 (БрАЖН10-4-4) Bronze БрАА10Мц2 (БрАМц10-2) Bronze BrA5 Bronze БрА6Мг1 (БрАМг6-1) Bronze BrA7 Bronze БрА8,5Ж4Н5Мц1,5 (БрАЖНМц8,5-4-5-1,5) Bronze БрАА9Ж4 (БрАЖ9-4) Bronze БрА9Мц2 (БрАМц9-2) Bronze БрБ1,7НТ (БрБНТ1,7) Bronze БрБ1,9НТ (БрБНТ1,9) Bronze БрБ1,9НТМг (БрБНТ1,9Мг) Bronze BrN1,5Kr0,5 (BrNKr1,5-0,5) Bronze BrB2,5 Bronze БрК0,4Х0,6Кo1,6 (БрКХКo0,4-0,6-1,6) Bronze BrK1H3 (BrKN1-3) Bronze БрК3Мц1 (БрКМц3-1) Bronze BrKd0,5X0,15 (BrKdX0,5-0,15) Bronze BrKd1 BrKo3Mts10 (BrKoMts3-10) bronze Bronze BrMg0.03Cr0.035 (BrMgCr0.03-0.035) Bronze BrMg0,3 Bronze BrMg0,5 Bronze BrMg0,8 Bronze BrMc12A8Zh3N2 (BrMcAzHN12-8-3-2)

Designation

Name The value
Designation GOST Cyrillic БрМц5
Designation GOST Latin BpMts5
Transliteration BrMts5
The chemical elements BaMn5

Description

Bronze Brmc5 used: for the manufacture of corrosion-resistant parts and products with high mechanical properties, operating at elevated temperatures.

Note

According to GOST 28873−90 bronze Brmc5 should be removed from the production 01.01.1992 G.
Corrosion resistant manganese bronze Brmc5 has high mechanical properties, good deformability in hot and cold conditions, increased resistance.

Standards

Name Code Standards
Non-ferrous metals, including rare metals, and their alloys В51 GOST 18175-78, GOST 28873-90

Chemical composition

Standard P Mn Si Fe Cu Zn Sn Pb
GOST 18175-78 ≤0.01 4.5-5.5 ≤0.1 ≤0.35 The rest ≤0.4 ≤0.1 ≤0.03
Cu is the basis.
According to GOST 18175-78, the total mass fraction of normalized impurities is ≤ 0.90%. The mass fraction of nickel is allowed up to 0.50% without taking it into account in the total amount of impurities.

Mechanical characteristics

Section, mm σB, MPa d5, % Brinell hardness number, MPa
Rolled steel in delivery condition (longitudinal samples)
300-360 35-45 70-90
500-600 5-6 -

Description mechanical marks

Name Description
Section Section
σB Limit short-term strength
d5 Elongation after rupture

Physical characteristics

Temperature Е, ГПа r, кг/м3 R, НОм · м
20 105 8600 200

A description of the physical symbols

Name Description
Е The normal elasticity modulus
l Coefficient of thermal conductivity
R UD. the resistivity

Our consultant will save your time

+49(1523) 72 15 100
E-mail:
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)